[aspect-devel] hacking aspect

[Thomas Geenen]

first lines look like this

# 1: Time step number
# 2: Time (years)
# 3: Number of mesh cells
# 4: Number of Stokes degrees of freedom
# 5: Number of temperature degrees of freedom
# 6: Iterations for Stokes solver
# 7: Time step size (years)
# 8: Iterations for temperature solver
# 9: Visualization file name
# 10: RMS velocity (m/year)
# 11: Max. velocity (m/year)
# 12: Minimal temperature (K)
# 13: Average temperature (K)
# 14: Maximal temperature (K)
# 15: Average nondimensional temperature (K)
# 16: RMS velocity (Dimensionless)
# 17: Core-mantle heat flux (W)
# 18: Surface heat flux (W)
# 19: Outer Nusselt number
# 20: Inner Nusselt number
  0 0.0000e+00 1536 14387 1649 36 1.8683e+09 7                 ""
0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 0.000000e+00 0.00000000e+00 0.00000000e+00  0.0000e+00
0.0000e+00
  0 0.0000e+00 2472 24387 2783 38 9.8363e+08 8 bin/solution-00000
3.27746412e-05 1.28753142e-04 3.00000000e+02 3.01433325e+03 6.30000000e+03
4.78465596e-01 0.000000e+00 0.00000000e+00 0.00000000e+00  0.0000e+00
0.0000e+00
  0 0.0000e+00    0     0    0  0 0.0000e+00 0                 ""
3.27746412e-05 1.28753142e-04 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 5.336036e+01 2.27779029e+05 4.01609222e+05 -1.7460e-01
1.6842e-01
  0 0.0000e+00    0     0    0  0 0.0000e+00 0                 ""
0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 0.000000e+00 2.27779029e+05 4.01609222e+05  0.0000e+00
0.0000e+00
  1 9.8363e+08 2472 24387 2783 36 2.6323e+08 5 bin/solution-00001
1.13556854e-04 4.86263483e-04 3.00000000e+02 3.01153801e+03 6.30000000e+03
4.78021907e-01 0.000000e+00 0.00000000e+00 0.00000000e+00  0.0000e+00
0.0000e+00
  0 0.0000e+00    0     0    0  0 0.0000e+00 0                 ""
1.13556854e-04 4.86263483e-04 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 1.848818e+02 2.25306295e+05 3.82629285e+05 -1.7270e-01
1.6046e-01
  0 0.0000e+00    0     0    0  0 0.0000e+00 0                 ""
0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 0.000000e+00 2.25306295e+05 3.82629285e+05  0.0000e+00
0.0000e+00
  2 1.2469e+09 2472 24387 2783 34 1.3948e+08 5 bin/solution-00002
2.07045474e-04 9.17710766e-04 3.00000000e+02 3.01020536e+03 6.30000000e+03
4.77810374e-01 0.000000e+00 0.00000000e+00 0.00000000e+00  0.0000e+00
0.0000e+00
  0 0.0000e+00    0     0    0  0 0.0000e+00 0                 ""
2.07045474e-04 9.17710766e-04 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 3.370906e+02 2.24052120e+05 3.74963061e+05 -1.7174e-01
1.5724e-01
  0 0.0000e+00    0     0    0  0 0.0000e+00 0                 ""
0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 0.000000e+00 2.24052120e+05 3.74963061e+05  0.0000e+00
0.0000e+00
  3 1.3863e+09 2472 24387 2783 35 9.4402e+07 5                 ""
3.01817913e-04 1.35582905e-03 3.00000000e+02 3.00941836e+03 6.30000000e+03
4.77685454e-01 0.000000e+00 0.00000000e+00 0.00000000e+00  0.0000e+00
0.0000e+00
  0 0.0000e+00    0     0    0  0 0.0000e+00 0                 ""
3.01817913e-04 1.35582905e-03 0.00000000e+00 0.00000000e+00 0.00000000e+00
0.00000000e+00 4.913895e+02 2.23246233e+05 3.70946574e+05 -1.7112e-01
1.5556e-01

On Mon, Jan 9, 2012 at 6:43 PM, Wolfgang Bangerth <bangerth at math.tamu.edu>wrote:

> On 01/09/2012 09:55 AM, Thomas Geenen wrote:
>
>> it seems that per timestep there are multiple lines written to
>> bin/statistics
>> for the tables model 3 lines per timestep.
>> each line contains a subset of the results with all other values zero.
>> (the correct number of columns)
>>
>
> That's weird. Is there one column that has more than one non-zero value? I
> could imagine that one or more postprocessors happen to add entries to the
> table using the same key more than once per time step, and then everything
> would come out as multiple lines. Each call to add_value needs to use a
> unique key.
>
>
>
>  also i added a postprocessor class that recomputes some of the
>> quantities from the heat_flux_statistics.cc class.
>> i would like to be able to skip this postprocessor. at the moment it
>> loops over all postprocessors.
>> it would be nice if i can set which postprocessor to use from the input
>> file.
>>
>
> You can. In the input file, you can specify which postprocessors you want.
> This can either be "all", or it can be a comma separated list of
> postprocessor names.
>
>
> Cheers
>  W.
>
> ------------------------------**------------------------------**
> ------------
> Wolfgang Bangerth               email:            bangerth at math.tamu.edu
>                                www: http://www.math.tamu.edu/~**bangerth/<http://www.math.tamu.edu/~bangerth/>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://geodynamics.org/pipermail/aspect-devel/attachments/20120109/a1859af8/attachment-0001.htm