[aspect-devel] [CIG-MC] Installing ASPECT on Cray XC30

Marine Lasbleis marine.lasbleis at elsi.jp
Wed Jul 12 17:55:26 PDT 2017 

Hi Rene, 

Thanks for the script! I guess our CRAY XC which has no real IT person (a researcher is in charge of it, but he is obviously also doing research, so has no real time for admin), it may be a more “clean” installation and less modified than other similar clusters.

And I used the last released version (not the development version). 
I will try to use the development version to see if this will change the error while removing the flag!

Best,
Marine Lasbleis
 
=====
ELSI Research Scientist
Earth Life Science Institute
Tokyo Institute of Technology
Tokyo, Japan
+81 70 1572 5070
marine.lasbleis at elsi.jp <mailto:marine.lasbleis at elsi.jp>

https://members.elsi.jp/~marine.lasbleis/ <https://members.elsi.jp/~marine.lasbleis/> 
http://elsi.jp/en/ <http://elsi.jp/en/> 
 

> On 13 Jul 2017, at 02:24, Rene Gassmoeller <rene.gassmoeller at mailbox.org> wrote:
> 
> Hi Marine,
> 
> I have successfully installed ASPECT on several Cray XC30 and XC40 systems (I was the person with the Cray install script for candi ;-)), but the problem here is that these clusters are usually heavily modified by the admin teams so a general instruction does not help as much.
> 
> That being said, from your description it really seems like Timo's suggestion is the last step missing
> 
> cmake -D ASPECT_USE_FP_EXCEPTIONS=OFF .
> 
> in the ASPECT build directory during compiling should do the trick. 
> 
> Alternatively, we merged a pull request a few weeks back (https://github.com/geodynamics/aspect/pull/1819 <https://github.com/geodynamics/aspect/pull/1819>), which we hoped would fix this issue. Do you use an ASPECT version before or after that PR (i.e. latest release or latest development version)?
> 
> 
> 
> Best,
> 
> Rene
> 
> 
> 
> 
> 
> 
> On 07/12/2017 01:48 AM, Marine Lasbleis wrote:
>> Hi Philip, 
>> 
>> Could you tell me exactly which tests you are performing and are failing? 
>> Sorry, I’m really not familiar with deal.II, so would prefer to be sure about what I’m doing! 
>> 
>> (I’m assuming that, since I ran a couple of simple box convection, it is working correctly, but it may indeed not be the case)
>> 
>> We don’t have admin team on our Cray XC30, so I guess it has not been modified from the original version we got. 
>> 
>> Marine Lasbleis
>>  
>> =====
>> ELSI Research Scientist
>> Earth Life Science Institute
>> Tokyo Institute of Technology
>> Tokyo, Japan
>> +81 70 1572 5070
>> marine.lasbleis at elsi.jp <mailto:marine.lasbleis at elsi.jp>
>> 
>> https://members.elsi.jp/~marine.lasbleis/ <https://members.elsi.jp/%7Emarine.lasbleis/> 
>> http://elsi.jp/en/ <http://elsi.jp/en/> 
>>  
>> 
>>> On 12 Jul 2017, at 05:39, HERON, PHILIP J. <philip.j.heron at durham.ac.uk <mailto:philip.j.heron at durham.ac.uk>> wrote:
>>> 
>>> Hi Marine, 
>>> 
>>> I have attempted to install ASPECT on a Cray XC30 (Archer HPC in the UK) with no success. The HPC admin team has not had any success either. Please keep up posted on your progress. 
>>> 
>>> I can compile and build dealii and aspect, but most dealii tests fail: 
>>> 
>>>   4 - mpi.debug (Failed)
>>>   6 - p4est.debug (Failed)
>>>   7 - step-trilinos.debug (Failed)
>>> 
>>> I will have another go this week. 
>>> 
>>> Phil
>>> 
>>> Philip J. Heron
>>> Junior Research Fellow
>>> Dept. of Earth Sciences
>>> Durham University 
>>> web: http://philheron.com <http://philheron.com/>
>>> 
>>> From: Aspect-devel <aspect-devel-bounces at geodynamics.org <mailto:aspect-devel-bounces at geodynamics.org>> on behalf of Timo Heister <heister at clemson.edu <mailto:heister at clemson.edu>>
>>> Sent: 11 July 2017 14:00:09
>>> To: aspect-devel
>>> Subject: Re: [aspect-devel] Fwd: [CIG-MC] Installing ASPECT on Cray XC30
>>>  
>>> Marine,
>>> 
>>> 1. can you post your detailed.log from your ASPECT directory?
>>> 
>>> 2. can you try to call
>>> cmake -D ASPECT_USE_FP_EXCEPTIONS=OFF .
>>> 
>>> inside your aspect build directory, and then "make" again? This should
>>> disable the floating point exceptions (we use this as a tool to find
>>> errors and bugs), but you will likely run into other problems then.
>>> But maybe this is enough to make things work.
>>> 
>>> 
>>> On Tue, Jul 11, 2017 at 2:09 AM, Marine Lasbleis
>>> <marine.lasbleis at elsi.jp <mailto:marine.lasbleis at elsi.jp>> wrote:
>>> > Hi all,
>>> >
>>> > Sorry, it appears I used the wrong mailing list!
>>> > Let me know if someone has experience building ASPECT (and required
>>> > libraries) on a CRAY XC30.
>>> >
>>> > Best,
>>> > Marine
>>> >
>>> >
>>> > Marine Lasbleis
>>> >
>>> > =====
>>> > ELSI Research Scientist
>>> > Earth Life Science Institute
>>> > Tokyo Institute of Technology
>>> > Tokyo, Japan
>>> > +81 70 1572 5070
>>> > marine.lasbleis at elsi.jp <mailto:marine.lasbleis at elsi.jp>
>>> >
>>> > https://urldefense.proofpoint.com/v2/url?u=https-3A__members.elsi.jp_-7Emarine.lasbleis_&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=LoLdd_1ebxXqVRRXpWavR7d1dGghq8WrxfMfJW5bv90&e= <https://urldefense.proofpoint.com/v2/url?u=https-3A__members.elsi.jp_-7Emarine.lasbleis_&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=LoLdd_1ebxXqVRRXpWavR7d1dGghq8WrxfMfJW5bv90&e=> 
>>> > https://urldefense.proofpoint.com/v2/url?u=http-3A__elsi.jp_en_&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=7qmW2cZqp2dDQA8f55NM9FLl5v83q1G1A8WVaCxGC14&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__elsi.jp_en_&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=7qmW2cZqp2dDQA8f55NM9FLl5v83q1G1A8WVaCxGC14&e=> 
>>> >
>>> >
>>> > Begin forwarded message:
>>> >
>>> > From: Max Rudolph <maxrudolph at ucdavis.edu <mailto:maxrudolph at ucdavis.edu>>
>>> > Subject: Re: [CIG-MC] Installing ASPECT on Cray XC30
>>> > Date: 11 Jul 2017 11:52:51 GMT+9
>>> > To: <cig-mc at geodynamics.org <mailto:cig-mc at geodynamics.org>>
>>> > Reply-To: cig-mc at geodynamics.org <mailto:cig-mc at geodynamics.org>
>>> >
>>> > Marine,
>>> > You may want to post this on the aspect-devel mailing list if you haven't
>>> > done so already.
>>> >
>>> > Max
>>> >
>>> > On Mon, Jul 10, 2017 at 5:00 PM, Marine Lasbleis <marine.lasbleis at gmail.com <mailto:marine.lasbleis at gmail.com>>
>>> > wrote:
>>> >>
>>> >> Hi all,
>>> >>
>>> >> This is my first message here, I hope it’s OK.
>>> >> I’m started to work on ASPECT, and installed it already on a desktop
>>> >> computer (debian with 8 cores). But would like to install it on the
>>> >> available clusters. (I have access to 3 different clusters. Not sure which
>>> >> one is the best for that… And definitely no real admin for the clusters.
>>> >> They are “self-organised”, which is not always for the best)
>>> >>
>>> >> I’m trying to install ASPECT on the ELSI cluster, which is a CRAY CX30,
>>> >> and while having problems, I found that you may have done the same a couple
>>> >> of weeks ago (I saw this conversation:
>>> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__dealii.narkive.com_jCU1oGdB_deal-2Dii-2Dget-2Derrors-2Dwhen-2Dinstalling-2Ddealii-2Don-2Dopensuse-2Dleap-2D42-2D1-2Dby-2Dusing-2Dcandi&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=3hIE02zdEMfEZQ-54THur4-xXpYPz_X9QkkDRViqAOc&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__dealii.narkive.com_jCU1oGdB_deal-2Dii-2Dget-2Derrors-2Dwhen-2Dinstalling-2Ddealii-2Don-2Dopensuse-2Dleap-2D42-2D1-2Dby-2Dusing-2Dcandi&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=3hIE02zdEMfEZQ-54THur4-xXpYPz_X9QkkDRViqAOc&e=> 
>>> >> )
>>> >>
>>> >> For now, what we’ve done: (before seeing candi installation)
>>> >> - switch to PrgEnv-gnu
>>> >> - try to install p4est. But it seems that we need to use “ftn” and not
>>> >> fortran or others, so he can’t do anything, and stop very soon. I tried to
>>> >> modify by hand the configure file (adding ftn where I could find the system
>>> >> was looking for fortran of mpif77.) But I guess it’s definitely not a good
>>> >> idea, and I am obviously still missing a couple of call because I still got
>>> >> the same error.
>>> >>
>>> >> So, with the conversation, I guessed that https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_dealii_candi&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=PNy4RPfYtSh0YwU5s31LHSfmZj0RgQv3wznnVVHjRXw&e= <https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_dealii_candi&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=PNy4RPfYtSh0YwU5s31LHSfmZj0RgQv3wznnVVHjRXw&e=> 
>>> >> can actually install everything for me.
>>> >> Since I’m using a slightly different cluster (CRAY XC30), I will try to
>>> >> give you updates on my progress.
>>> >> I’m not familiar with candi, but I decided to give a try, so please excuse
>>> >> me if I am doing obvious mistakes.
>>> >>
>>> >> I changed the configuration as requested, and loaded the required modules
>>> >> and defined new variables for the info on the compilers.
>>> >> In this particular cluster, we need to be careful with the path where to
>>> >> install (the default one is on a drive that is very slow to access, and
>>> >> compilation takes forever), so I had to use a -p path option. Also, I think
>>> >> I used first too many cores to compile, and got a memory error (internal
>>> >> compiler error raised, which seems to be related to available memory)
>>> >>
>>> >> So, from my day trying to install:
>>> >> - I finished the candi.sh script, apparently everything correctly
>>> >> installed.
>>> >> - I built ASPECT (with this particular cluster, be careful with cmake. By
>>> >> default, the cmake is not up-to-date, and in particular even after
>>> >> installation with candi.sh, the available cmake is not the one that was
>>> >> installed)
>>> >> I got a couple of warnings, mostly about PETSc, that I thought were only
>>> >> warnings and not problems.
>>> >> Most of them were along the line of this one:
>>> >> warning: 'dealii::PETScWrappers::MPI::Vector::supports_distributed_data'
>>> >> is deprecated [-Wdeprecated-declarations] , for either PETSc or Trilinos.
>>> >>
>>> >> - I’ve run a couple of examples from the cookbook. None are working.
>>> >>
>>> >> I got this from running ASPEC using aprun -n4 ../aspect burnman.prm
>>> >>
>>> >> -----------------------------------------------------------------------------
>>> >> -- This is ASPECT, the Advanced Solver for Problems in Earth's ConvecTion.
>>> >> --     . version 1.5.0
>>> >> --     . running in DEBUG mode
>>> >> --     . running with 4 MPI processes
>>> >> --     . using Trilinos
>>> >>
>>> >> -----------------------------------------------------------------------------
>>> >>
>>> >> [0]PETSC ERROR: [1]PETSC ERROR: [3]PETSC ERROR: [2]PETSC ERROR:
>>> >> ------------------------------------------------------------------------
>>> >> [0]PETSC ERROR:
>>> >> ------------------------------------------------------------------------
>>> >> ------------------------------------------------------------------------
>>> >> [2]PETSC ERROR:
>>> >> ------------------------------------------------------------------------
>>> >> [1]PETSC ERROR: [3]PETSC ERROR: Caught signal number 8 FPE: Floating Point
>>> >> Exception,probably divide by zero
>>> >> [1]PETSC ERROR: Try option -start_in_debugger or -on_error_attach_debugger
>>> >> Caught signal number 8 FPE: Floating Point Exception,probably divide by
>>> >> zero
>>> >> [1]PETSC ERROR: [3]PETSC ERROR: or see
>>> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.mcs.anl.gov_petsc_documentation_faq.html-23valgrind&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=EwRL-vfnsOaRgZyq9yA5cgFyGt6wyqbxmPnUR8DEnjo&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.mcs.anl.gov_petsc_documentation_faq.html-23valgrind&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=EwRL-vfnsOaRgZyq9yA5cgFyGt6wyqbxmPnUR8DEnjo&e=> 
>>> >> Try option -start_in_debugger or -on_error_attach_debugger
>>> >> [1]PETSC ERROR: [3]PETSC ERROR: or try https://urldefense.proofpoint.com/v2/url?u=http-3A__valgrind.org&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=ozKrZdv65t35wUP3q4s5YnSV27_oA6xmJCjsqYFNx3s&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__valgrind.org&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=ozKrZdv65t35wUP3q4s5YnSV27_oA6xmJCjsqYFNx3s&e=>  on GNU/linux
>>> >> and Apple Mac OS X to find memory corruption errors
>>> >> or see https://urldefense.proofpoint.com/v2/url?u=http-3A__www.mcs.anl.gov_petsc_documentation_faq.html-23valgrind&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=EwRL-vfnsOaRgZyq9yA5cgFyGt6wyqbxmPnUR8DEnjo&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.mcs.anl.gov_petsc_documentation_faq.html-23valgrind&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=EwRL-vfnsOaRgZyq9yA5cgFyGt6wyqbxmPnUR8DEnjo&e=> 
>>> >> [1]PETSC ERROR: [3]PETSC ERROR: configure using --with-debugging=yes,
>>> >> recompile, link, and run
>>> >> or try https://urldefense.proofpoint.com/v2/url?u=http-3A__valgrind.org&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=ozKrZdv65t35wUP3q4s5YnSV27_oA6xmJCjsqYFNx3s&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__valgrind.org&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=ozKrZdv65t35wUP3q4s5YnSV27_oA6xmJCjsqYFNx3s&e=>  on GNU/linux and Apple Mac OS X to find memory
>>> >> corruption errors
>>> >> [1]PETSC ERROR: [3]PETSC ERROR: to get more information on the crash.
>>> >> configure using --with-debugging=yes, recompile, link, and run
>>> >> [3]PETSC ERROR: to get more information on the crash.
>>> >> [1]PETSC ERROR: --------------------- Error Message
>>> >> --------------------------------------------------------------
>>> >> Caught signal number 8 FPE: Floating Point Exception,probably divide by
>>> >> zero
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> Any idea where this could come from?
>>> >> (any additional files I should show you?)
>>> >>
>>> >>
>>> >> Thanks! (and many thanks to the person who did the candi.sh script for
>>> >> Cray XC40 :-) )
>>> >> Marine
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> _______________________________________________
>>> >> CIG-MC mailing list
>>> >> CIG-MC at geodynamics.org <mailto:CIG-MC at geodynamics.org>
>>> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.geodynamics.org_cgi-2Dbin_mailman_listinfo_cig-2Dmc&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=7tnjS3DwD11pd0Hw_1BkS8zxpTVmv_DKo8iWlM7fRuE&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.geodynamics.org_cgi-2Dbin_mailman_listinfo_cig-2Dmc&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=7tnjS3DwD11pd0Hw_1BkS8zxpTVmv_DKo8iWlM7fRuE&e=> 
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> > ---------------------------------
>>> > Max Rudolph
>>> > Assistant Professor, Earth and Planetary Sciences, UC Davis
>>> > webpage
>>> > _______________________________________________
>>> > CIG-MC mailing list
>>> > CIG-MC at geodynamics.org <mailto:CIG-MC at geodynamics.org>
>>> > https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.geodynamics.org_cgi-2Dbin_mailman_listinfo_cig-2Dmc&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=7tnjS3DwD11pd0Hw_1BkS8zxpTVmv_DKo8iWlM7fRuE&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.geodynamics.org_cgi-2Dbin_mailman_listinfo_cig-2Dmc&d=DwIFaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=c08Btfq4m9QEScXN3ZQwLZzzWQE7S8CYq1IYuzKV_Zk&m=zrvFCXon07qCkF8qXzZ6rHu6CjY30e55CUFHopV1Hm8&s=7tnjS3DwD11pd0Hw_1BkS8zxpTVmv_DKo8iWlM7fRuE&e=> 
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > Aspect-devel mailing list
>>> > Aspect-devel at geodynamics.org <mailto:Aspect-devel at geodynamics.org>
>>> > https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.geodynamics.org_cgi-2Dbin_mailman_listinfo_aspect-2Ddevel&d=DwIGaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=R5lvg9JC99XvuTgScgbY_QFS80R7PEA2q0EPwDy7VQw&m=-Akgl8D9XHMqGKMmF_ZJUPsW7I_-1G6mLeoE2Wpszrc&s=0Gsi6keZz8ri0Vnr9RwBCIGZqCsFqbzuDynW8S3C41U&e= <https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.geodynamics.org_cgi-2Dbin_mailman_listinfo_aspect-2Ddevel&d=DwIGaQ&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=R5lvg9JC99XvuTgScgbY_QFS80R7PEA2q0EPwDy7VQw&m=-Akgl8D9XHMqGKMmF_ZJUPsW7I_-1G6mLeoE2Wpszrc&s=0Gsi6keZz8ri0Vnr9RwBCIGZqCsFqbzuDynW8S3C41U&e=>
>>> 
>>> -- 
>>> Timo Heister
>>> http://www.math.clemson.edu/~heister/ <http://www.math.clemson.edu/%7Eheister/>
>>> _______________________________________________
>>> Aspect-devel mailing list
>>> Aspect-devel at geodynamics.org <mailto:Aspect-devel at geodynamics.org>
>>> http://lists.geodynamics.org/cgi-bin/mailman/listinfo/aspect-devel <http://lists.geodynamics.org/cgi-bin/mailman/listinfo/aspect-devel>_______________________________________________
>>> Aspect-devel mailing list
>>> Aspect-devel at geodynamics.org <mailto:Aspect-devel at geodynamics.org>
>>> http://lists.geodynamics.org/cgi-bin/mailman/listinfo/aspect-devel <http://lists.geodynamics.org/cgi-bin/mailman/listinfo/aspect-devel>
>> 
>> 
>> _______________________________________________
>> Aspect-devel mailing list
>> Aspect-devel at geodynamics.org <mailto:Aspect-devel at geodynamics.org>
>> http://lists.geodynamics.org/cgi-bin/mailman/listinfo/aspect-devel <http://lists.geodynamics.org/cgi-bin/mailman/listinfo/aspect-devel>
> -- 
> Rene Gassmoeller
> http://www.math.colostate.edu/~gassmoel/ <http://www.math.colostate.edu/~gassmoel/>_______________________________________________
> Aspect-devel mailing list
> Aspect-devel at geodynamics.org
> http://lists.geodynamics.org/cgi-bin/mailman/listinfo/aspect-devel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.geodynamics.org/pipermail/aspect-devel/attachments/20170713/4f187aaf/attachment-0001.html>

More information about the Aspect-devel mailing list