[cig-commits] r5005 - in vendor: . ez_setup ez_setup/current
leif at geodynamics.org
leif at geodynamics.org
Sat Oct 14 08:06:24 PDT 2006
Author: leif
Date: 2006-10-14 08:06:23 -0700 (Sat, 14 Oct 2006)
New Revision: 5005
Added:
vendor/ez_setup/
vendor/ez_setup/current/
vendor/ez_setup/current/README.txt
vendor/ez_setup/current/__init__.py
Log:
Created ez_setup vendor branch. Imported initial
0.6c3 vendor drop.
There will be our own version of ez_setup over in 'cs'
which projects can share using svn:externals.
I'm aware that setuptools has a publically-accessible
svn repo for this purpose:
svn://svn.eby-sarna.com/svnroot/ez_setup
In fact, that is where this initial drop originated.
However, we want our own for three reasons:
1. I want to share between projects the patch
that makes setup() more permissive about the
installed version of setuptools. (Unfortunately,
there is currently no way to say, "download the
latest version if 'setuptools' is not installed,
but don't *require* the latest version."
Hence the patch.)
2. Might want to insulate ourselves from updates.
3. We've had problems with "svn:" (vs. "http:")
externals in the past, and I can't find an
"http:" auto-update link.
On the mailing list, Eby has suggested dropping support
for this slick little script, so we may even end up
maintaining our own bootstrap script ourselves.
Added: vendor/ez_setup/current/README.txt
===================================================================
--- vendor/ez_setup/current/README.txt 2006-10-14 14:39:04 UTC (rev 5004)
+++ vendor/ez_setup/current/README.txt 2006-10-14 15:06:23 UTC (rev 5005)
@@ -0,0 +1,15 @@
+This directory exists so that Subversion-based projects can share a single
+copy of the ``ez_setup`` bootstrap module for ``setuptools``, and have it
+automatically updated in their projects when ``setuptools`` is updated.
+
+For your convenience, you may use the following svn:externals definition::
+
+ ez_setup svn://svn.eby-sarna.com/svnroot/ez_setup
+
+You can set this by executing this command in your project directory::
+
+ svn propedit svn:externals .
+
+And then adding the line shown above to the file that comes up for editing.
+Then, whenever you update your project, ``ez_setup`` will be updated as well.
+
Property changes on: vendor/ez_setup/current/README.txt
___________________________________________________________________
Name: svn:executable
+
Added: vendor/ez_setup/current/__init__.py
===================================================================
--- vendor/ez_setup/current/__init__.py 2006-10-14 14:39:04 UTC (rev 5004)
+++ vendor/ez_setup/current/__init__.py 2006-10-14 15:06:23 UTC (rev 5005)
@@ -0,0 +1,222 @@
+#!python
+"""Bootstrap setuptools installation
+
+If you want to use setuptools in your package's setup.py, just include this
+file in the same directory with it, and add this to the top of your setup.py::
+
+ from ez_setup import use_setuptools
+ use_setuptools()
+
+If you want to require a specific version of setuptools, set a download
+mirror, or use an alternate download directory, you can do so by supplying
+the appropriate options to ``use_setuptools()``.
+
+This file can also be run as a script to install or upgrade setuptools.
+"""
+import sys
+DEFAULT_VERSION = "0.6c3"
+DEFAULT_URL = "http://cheeseshop.python.org/packages/%s/s/setuptools/" % sys.version[:3]
+
+md5_data = {
+ 'setuptools-0.6b1-py2.3.egg': '8822caf901250d848b996b7f25c6e6ca',
+ 'setuptools-0.6b1-py2.4.egg': 'b79a8a403e4502fbb85ee3f1941735cb',
+ 'setuptools-0.6b2-py2.3.egg': '5657759d8a6d8fc44070a9d07272d99b',
+ 'setuptools-0.6b2-py2.4.egg': '4996a8d169d2be661fa32a6e52e4f82a',
+ 'setuptools-0.6b3-py2.3.egg': 'bb31c0fc7399a63579975cad9f5a0618',
+ 'setuptools-0.6b3-py2.4.egg': '38a8c6b3d6ecd22247f179f7da669fac',
+ 'setuptools-0.6b4-py2.3.egg': '62045a24ed4e1ebc77fe039aa4e6f7e5',
+ 'setuptools-0.6b4-py2.4.egg': '4cb2a185d228dacffb2d17f103b3b1c4',
+ 'setuptools-0.6c1-py2.3.egg': 'b3f2b5539d65cb7f74ad79127f1a908c',
+ 'setuptools-0.6c1-py2.4.egg': 'b45adeda0667d2d2ffe14009364f2a4b',
+ 'setuptools-0.6c2-py2.3.egg': 'f0064bf6aa2b7d0f3ba0b43f20817c27',
+ 'setuptools-0.6c2-py2.4.egg': '616192eec35f47e8ea16cd6a122b7277',
+ 'setuptools-0.6c3-py2.3.egg': 'f181fa125dfe85a259c9cd6f1d7b78fa',
+ 'setuptools-0.6c3-py2.4.egg': 'e0ed74682c998bfb73bf803a50e7b71e',
+ 'setuptools-0.6c3-py2.5.egg': 'abef16fdd61955514841c7c6bd98965e',
+}
+
+import sys, os
+
+def _validate_md5(egg_name, data):
+ if egg_name in md5_data:
+ from md5 import md5
+ digest = md5(data).hexdigest()
+ if digest != md5_data[egg_name]:
+ print >>sys.stderr, (
+ "md5 validation of %s failed! (Possible download problem?)"
+ % egg_name
+ )
+ sys.exit(2)
+ return data
+
+
+def use_setuptools(
+ version=DEFAULT_VERSION, download_base=DEFAULT_URL, to_dir=os.curdir,
+ download_delay=15
+):
+ """Automatically find/download setuptools and make it available on sys.path
+
+ `version` should be a valid setuptools version number that is available
+ as an egg for download under the `download_base` URL (which should end with
+ a '/'). `to_dir` is the directory where setuptools will be downloaded, if
+ it is not already available. If `download_delay` is specified, it should
+ be the number of seconds that will be paused before initiating a download,
+ should one be required. If an older version of setuptools is installed,
+ this routine will print a message to ``sys.stderr`` and raise SystemExit in
+ an attempt to abort the calling script.
+ """
+ try:
+ import setuptools
+ if setuptools.__version__ == '0.0.1':
+ print >>sys.stderr, (
+ "You have an obsolete version of setuptools installed. Please\n"
+ "remove it from your system entirely before rerunning this script."
+ )
+ sys.exit(2)
+ except ImportError:
+ egg = download_setuptools(version, download_base, to_dir, download_delay)
+ sys.path.insert(0, egg)
+ import setuptools; setuptools.bootstrap_install_from = egg
+
+ import pkg_resources
+ try:
+ pkg_resources.require("setuptools>="+version)
+
+ except pkg_resources.VersionConflict, e:
+ # XXX could we install in a subprocess here?
+ print >>sys.stderr, (
+ "The required version of setuptools (>=%s) is not available, and\n"
+ "can't be installed while this script is running. Please install\n"
+ " a more recent version first.\n\n(Currently using %r)"
+ ) % (version, e.args[0])
+ sys.exit(2)
+
+def download_setuptools(
+ version=DEFAULT_VERSION, download_base=DEFAULT_URL, to_dir=os.curdir,
+ delay = 15
+):
+ """Download setuptools from a specified location and return its filename
+
+ `version` should be a valid setuptools version number that is available
+ as an egg for download under the `download_base` URL (which should end
+ with a '/'). `to_dir` is the directory where the egg will be downloaded.
+ `delay` is the number of seconds to pause before an actual download attempt.
+ """
+ import urllib2, shutil
+ egg_name = "setuptools-%s-py%s.egg" % (version,sys.version[:3])
+ url = download_base + egg_name
+ saveto = os.path.join(to_dir, egg_name)
+ src = dst = None
+ if not os.path.exists(saveto): # Avoid repeated downloads
+ try:
+ from distutils import log
+ if delay:
+ log.warn("""
+---------------------------------------------------------------------------
+This script requires setuptools version %s to run (even to display
+help). I will attempt to download it for you (from
+%s), but
+you may need to enable firewall access for this script first.
+I will start the download in %d seconds.
+
+(Note: if this machine does not have network access, please obtain the file
+
+ %s
+
+and place it in this directory before rerunning this script.)
+---------------------------------------------------------------------------""",
+ version, download_base, delay, url
+ ); from time import sleep; sleep(delay)
+ log.warn("Downloading %s", url)
+ src = urllib2.urlopen(url)
+ # Read/write all in one block, so we don't create a corrupt file
+ # if the download is interrupted.
+ data = _validate_md5(egg_name, src.read())
+ dst = open(saveto,"wb"); dst.write(data)
+ finally:
+ if src: src.close()
+ if dst: dst.close()
+ return os.path.realpath(saveto)
+
+def main(argv, version=DEFAULT_VERSION):
+ """Install or upgrade setuptools and EasyInstall"""
+
+ try:
+ import setuptools
+ except ImportError:
+ egg = None
+ try:
+ egg = download_setuptools(version, delay=0)
+ sys.path.insert(0,egg)
+ from setuptools.command.easy_install import main
+ return main(list(argv)+[egg]) # we're done here
+ finally:
+ if egg and os.path.exists(egg):
+ os.unlink(egg)
+ else:
+ if setuptools.__version__ == '0.0.1':
+ # tell the user to uninstall obsolete version
+ use_setuptools(version)
+
+ req = "setuptools>="+version
+ import pkg_resources
+ try:
+ pkg_resources.require(req)
+ except pkg_resources.VersionConflict:
+ try:
+ from setuptools.command.easy_install import main
+ except ImportError:
+ from easy_install import main
+ main(list(argv)+[download_setuptools(delay=0)])
+ sys.exit(0) # try to force an exit
+ else:
+ if argv:
+ from setuptools.command.easy_install import main
+ main(argv)
+ else:
+ print "Setuptools version",version,"or greater has been installed."
+ print '(Run "ez_setup.py -U setuptools" to reinstall or upgrade.)'
+
+
+
+def update_md5(filenames):
+ """Update our built-in md5 registry"""
+
+ import re
+ from md5 import md5
+
+ for name in filenames:
+ base = os.path.basename(name)
+ f = open(name,'rb')
+ md5_data[base] = md5(f.read()).hexdigest()
+ f.close()
+
+ data = [" %r: %r,\n" % it for it in md5_data.items()]
+ data.sort()
+ repl = "".join(data)
+
+ import inspect
+ srcfile = inspect.getsourcefile(sys.modules[__name__])
+ f = open(srcfile, 'rb'); src = f.read(); f.close()
+
+ match = re.search("\nmd5_data = {\n([^}]+)}", src)
+ if not match:
+ print >>sys.stderr, "Internal error!"
+ sys.exit(2)
+
+ src = src[:match.start(1)] + repl + src[match.end(1):]
+ f = open(srcfile,'w')
+ f.write(src)
+ f.close()
+
+
+if __name__=='__main__':
+ if len(sys.argv)>2 and sys.argv[1]=='--md5update':
+ update_md5(sys.argv[2:])
+ else:
+ main(sys.argv[1:])
+
+
+
+
+
Property changes on: vendor/ez_setup/current/__init__.py
___________________________________________________________________
Name: svn:executable
+
More information about the cig-commits
mailing list