[cig-commits] r6756 - in short/3D/PyLith/branches/pylith-0.8: pylith3d/examples/bm1 pylith3d/examples/bm2 pylith3d/examples/linhex/tractest pylith3d/examples/lintet/bctest pylith3d/examples/lintet/bm1a pylith3d/examples/lintet/bm1b pylith3d/examples/lintet/bm1c pylith3d/examples/lintet/bm2a pylith3d/examples/lintet/bm5 pylith3d/examples/lintet/patchtest pylith3d/examples/lintet/powertest pylith3d/examples/lintet/splittest pylith3d/examples/lintet/tractest pylith3d/examples/lintet/vistest pylith3d/examples/quadhex/bm1a pylith3d/examples/quadhex/patchtest pylith3d/examples/quadtet/bm1a pylith3d/examples/quadtet/patchtest tutorials/reversenog/archive tutorials/splitcube/archive

leif at geodynamics.org leif at geodynamics.org
Wed May 2 13:09:16 PDT 2007 

Author: leif
Date: 2007-05-02 13:09:16 -0700 (Wed, 02 May 2007)
New Revision: 6756

Modified:
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm1/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm2/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d-debug.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bctest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1a/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1b/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1c/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm2a/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm5/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-bbar.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-red.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt1.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/ESF.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-debug.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-np2.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-debug.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-np2.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-parmetis.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-debug.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-np2.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/bm1a/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/patchtest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/bm1a/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/patchtest/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d-np2.cfg
   short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d.cfg
   short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d-np2.cfg
   short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d.cfg
Log:
Updated all *.cfg files to use the new property/facility/component
layout.


Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm1/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm1/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm1/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm1
 
 

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm2/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm2/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/bm2/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm2
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d-debug.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d-debug.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d-debug.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,8 +1,10 @@
 [pylith3d]
-# scanner (pylith3d) options
-scanner.fileRoot = tractest
-scanner.asciiOutput = full
-scanner.ucdOutput = ascii
+# pylith3d options
+fileRoot = tractest
+asciiOutput = full
+ucdOutput = ascii
+
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/linhex/tractest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = tractest
 asciiOutput = full
 ucdOutput = ascii

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bctest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bctest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bctest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bctest
 asciiOutput = full
 ucdOutput = ascii

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1a/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1a/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1a/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm1a
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1b/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1b/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1b/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm1b
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1c/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1c/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm1c/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm1c
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm2a/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm2a/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm2a/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm2a
 inputFileRoot = ../bm1a/bm1a
 bcInputFile = bm2a.bc

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm5/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm5/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/bm5/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm5
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-bbar.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-bbar.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-bbar.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = pt1
 
 

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-red.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-red.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt-red.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = pt1
 
 

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt1.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt1.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/patchtest/pt1.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = pt1
 
 

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/ESF.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/ESF.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/ESF.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -3,6 +3,6 @@
 #
 #     pylith3dapp.py ESF.cfg
 
-[pylith3d.scanner]
+[pylith3d]
 materialPropertiesInputFile = powertestESF.prop
 outputFileRoot = powertestESF

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/powertest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = powertest
 asciiOutput = full
 ucdOutput = ascii

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-debug.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-debug.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-debug.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,6 +9,7 @@
 start_in_debugger = true
 debugger_pause = 100
 
+[pylith3d]
 # PyLith options
 fileRoot = splittest
 asciiOutput = full

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-np2.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-np2.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d-np2.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,8 +1,8 @@
-[pylith3d.launcher]
+[pylith3d]
 # Run on multiple processors
-command = mpiexec -np 2
+nodes = 2
 
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -13,6 +13,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 # PyLith options
 fileRoot = splittest
 asciiOutput = full

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/splittest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,6 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 # PyLith options
 fileRoot = splittest
 asciiOutput = full

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-debug.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-debug.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-debug.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -4,6 +4,7 @@
 asciiOutput = full
 ucdOutput = ascii
 
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-np2.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-np2.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-np2.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -2,11 +2,11 @@
 # specifying a different configuration file on the command-line, these
 # are the values that will be used.
 
-[pylith3d.launcher]
+[pylith3d]
 # Specify multi-processor run
-command = mpiexec -np 2
+nodes = 2
 
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -17,6 +17,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 fileRoot = tractest
 asciiOutput = full
 ucdOutput = ascii

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-parmetis.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-parmetis.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d-parmetis.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -2,11 +2,11 @@
 # specifying a different configuration file on the command-line, these
 # are the values that will be used.
 
-[pylith3d.launcher]
+[pylith3d]
 # Specify multi-processor run
-command = mpiexec -np 2
+nodes = 2
 
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -18,6 +18,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 fileRoot = tractest
 asciiOutput = full
 ucdOutput = ascii

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/tractest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,6 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 # pylith3d options
 fileRoot = tractest
 asciiOutput = full

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-debug.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-debug.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-debug.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -5,6 +5,8 @@
 fileRoot = vistest
 asciiOutput = full
 ucdOutput = ascii
+
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-np2.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-np2.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d-np2.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -2,11 +2,11 @@
 # specifying a different configuration file on the command-line, these
 # are the values that will be used.
 
-[pylith3d.launcher]
+[pylith3d]
 # Specify multi-processor run
-command = mpiexec -np 2
+nodes = 2
 
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -17,6 +17,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 fileRoot = vistest
 asciiOutput = full
 ucdOutput = ascii

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/lintet/vistest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -2,7 +2,7 @@
 # specifying a different configuration file on the command-line, these
 # are the values that will be used.
 
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -13,6 +13,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 fileRoot = vistest
 asciiOutput = full
 ucdOutput = ascii

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/bm1a/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/bm1a/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/bm1a/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm1a
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/patchtest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/patchtest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadhex/patchtest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = pt1
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/bm1a/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/bm1a/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/bm1a/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = bm1a
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/patchtest/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/patchtest/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/pylith3d/examples/quadtet/patchtest/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,7 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
-[pylith3d.scanner]
+[pylith3d]
 fileRoot = pt1
 
 # Example of a keyword=value file to be used with TECTON.

Modified: short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d-np2.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d-np2.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d-np2.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,8 +1,8 @@
-[pylith3d.launcher]
+[pylith3d]
 # Specify multi-processor run
-command = mpiexec -np 2
+nodes = 2
 
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -13,6 +13,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 # Using pythonTimestep allows full vtk output for each time step
 pythonTimestep = true
 

Modified: short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/tutorials/reversenog/archive/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,6 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 # Using pythonTimestep allows full vtk output for each time step
 pythonTimestep = true
 

Modified: short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d-np2.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d-np2.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d-np2.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,8 +1,8 @@
-[pylith3d.launcher]
+[pylith3d]
 # Specify multi-processor run
-command = mpiexec -np 2
+nodes = 2
 
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -13,6 +13,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 # Using pythonTimestep allows full vtk output for each time step
 pythonTimestep = true
 

Modified: short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d.cfg	2007-05-02 20:06:42 UTC (rev 6755)
+++ short/3D/PyLith/branches/pylith-0.8/tutorials/splitcube/archive/pylith3d.cfg	2007-05-02 20:09:16 UTC (rev 6756)
@@ -1,4 +1,4 @@
-[pylith3d]
+[pylith3d.petsc]
 # PETSc options
 log_summary = true
 pc_type = bjacobi
@@ -9,6 +9,7 @@
 # start_in_debugger = true
 # debugger_pause = 100
 
+[pylith3d]
 # Using pythonTimestep allows full vtk output for each time step
 pythonTimestep = true

More information about the cig-commits mailing list