[cig-commits] r14490 - in seismo/3D/ADJOINT_TOMO/flexwin: scripts scripts/prepare_scripts/socal user_files/socal_3D
carltape at geodynamics.org
carltape at geodynamics.org
Fri Mar 27 13:06:01 PDT 2009
Author: carltape
Date: 2009-03-27 13:05:55 -0700 (Fri, 27 Mar 2009)
New Revision: 14490
Added:
seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/README
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90
Removed:
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m01
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m02
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m03
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m04
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m05
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m06
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m13
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m14
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m15
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m99
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_Daniel
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m01
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m02
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m03
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m04
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m05
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m06
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m05
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m06
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m11
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m12
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m13
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m14
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m15
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m99
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m01
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m02
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m03
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m04
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m05
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m06
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m13
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m14
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m15
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m99
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_Daniel
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m00_orig
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m01
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m02
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m03
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m04
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m05
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m06
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m07
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12_orig.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m13.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m14.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m15.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90
seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m99.f90
Modified:
seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows.pl
seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows_local.pl
seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/process_data_and_syn.pl
Log:
Removed dozens of socal parameter files, in preparation for FLEXWIN release. Modified socal run scripts.
Modified: seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows.pl
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows.pl 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows.pl 2009-03-27 20:05:55 UTC (rev 14490)
@@ -92,7 +92,7 @@
#-------------------------------------
# specify various directories (MUST BE MODIFIED FOR EACH USER)
-$dir0 = "/net/denali/scratch1/carltape/svn/cig/seismo/3D";
+$dir0 = "/net/denali/raid1/carltape/svn/cig/seismo/3D";
$dir_win_code = "$dir0/ADJOINT_TOMO/flexwin_work";
$dir_win_run = "$dir0/flexwin_run";
#$dir_win_code = "$dir0/ADJOINT_TOMO/flexwin_work_copy2";
@@ -143,9 +143,9 @@
$dir_win_run_data = "${dir_win_run}/DATA";
$dir_win_run_meas = "${dir_win_run}/MEASURE";
-# NEW: EVENT LIST
-#$eid_list = "/net/sierra/raid1/carltape/results/EID_LISTS/syn_run_${smodel}";
-$eid_list = "/net/sierra/raid1/carltape/results/EID_LISTS/syn_run_iterate";
+# EVENT LIST
+$eid_list = "/net/sierra/raid1/carltape/results/EID_LISTS/syn_run_${smodel}";
+#$eid_list = "/net/sierra/raid1/carltape/results/EID_LISTS/syn_run_iterate";
if (not -f $eid_list) {die("check if eid_list ${eid_list} exist or not\n")}
open(IN,$eid_list); @eids = <IN>; close(IN);
$nevent0 = @eids;
@@ -312,7 +312,8 @@
# If the windowing code has already been run, then move to the next event.
# NOTE: to overwrite, just comment out this option
- if (-f "$savedir/${eout}_runfile") {
+ if (-e $savedir) {
+ #if (-f "$savedir/${eout}_runfile") {
print "--> $savedir/${eout}_runfile exists -- on to next event\n";
} else {
Modified: seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows_local.pl
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows_local.pl 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/scripts/pick_all_windows_local.pl 2009-03-27 20:05:55 UTC (rev 14490)
@@ -24,7 +24,7 @@
# prepare_meas_all.pl
#
# EXAMPLES:
-# /net/denali/scratch1/carltape/svn/cig/seismo/3D/ADJOINT_TOMO/flexwin_work/scripts/pick_all_windows_local.pl
+# /net/denali/raid1/carltape/svn/cig/seismo/3D/ADJOINT_TOMO/flexwin_work/scripts/pick_all_windows_local.pl
#
# pick_all_windows_local.pl 2/30 1/1/1/1 input MEASURE
# pick_all_windows_local.pl 6/30 1/1/1/0 input MEASURE
@@ -40,7 +40,7 @@
($Ts,$ibools,$input,$dir) = @ARGV;
# specify source code directory (MUST BE MODIFIED FOR EACH USER)
-$dir_win_code = "/net/denali/scratch1/carltape/svn/cig/seismo/3D/ADJOINT_TOMO/flexwin_work";
+$dir_win_code = "/net/denali/raid1/carltape/svn/cig/seismo/3D/ADJOINT_TOMO/flexwin_work";
$dir_scripts = "${dir_win_code}/scripts";
if (not -e ${dir_win_code}) {die("check if ${dir_win_code} exist or not\n")}
Added: seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/README
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/README (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/README 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,7 @@
+Carl Tape, 27-March-2009
+
+The user is advised to examine process_data_and_syn.pl.
+This script was the processing script used for an application
+of seismic tomography for the southern California crust.
+The script will need to be adapted for other datasets.
+-------------------------------------------
Modified: seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/process_data_and_syn.pl
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/process_data_and_syn.pl 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/scripts/prepare_scripts/socal/process_data_and_syn.pl 2009-03-27 20:05:55 UTC (rev 14490)
@@ -3,10 +3,15 @@
#==========================================================
#
# Carl Tape
-# 22-Nov-2008
+# 27-March-2009
# process_data_and_syn.pl
#
# This script processes data and 3D-Socal-SEM synthetics for Southern California.
+# It calls two in-house processing scripts
+# process_cal_data.pl
+# process_trinet_syn_new.pl
+# The general procedure is advised for pre-processing data and synthetics for
+# seismic tomography applications.
#
# INPUT:
# CMT_list list of event ID labels in a file
@@ -35,9 +40,6 @@
# ~/UTILS/process_data_and_syn.pl 4 m16 1 0 d 2/30 # data, bandpass T=2-30
# ~/UTILS/process_data_and_syn.pl 4 m16 0 1 d 2/30 # syn, bandpass T=2-30
#
-# Chino Hills synthetics for Hiroo:
-# ~/UTILS/process_data_and_syn.pl 4 m16 0 1 d 50/150
-#
#==========================================================
if (@ARGV < 6) {die("Usage: process_data_and_syn.pl iprocess smodel idata isyn dat_ext Tmin/Tmax\n")}
@@ -135,7 +137,7 @@
$imin = 1; $imax = $ncmt; # default
#$imin = 1; $imax = 10;
-#$imin = 213; $imax = $imin;
+#$imin = 228; $imax = $imin;
#----------------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m00 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .true.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 2.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.07
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 3.0
+TSHIFT_REFERENCE = 1.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.0
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.85
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 2.5
+SNR_MAX_BASE = 3.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 4.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 1.0
+C_1 (small windows) = 5.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 4.0
+C_3b (separation time) = 2.5
+C_4a (curtail on left) = 2.0
+C_4b (curtail on right) = 6.0
+
+WEIGHT_SPACE_COVERAGE = 1.0
+WEIGHT_AVERAGE_CC = 1.0
+WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m01
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m01 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m01 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m02
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m02 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m02 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m03
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m03 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m03 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m04
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m04 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m04 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m05
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m05 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m05 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m06
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m06 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m06 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m07_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m08_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m09_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m10_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 2.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m11_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 2.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 2.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m12_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 2.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m13
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m13 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m13 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 2.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m14
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m14 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m14 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 2.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m15
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m15 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m15 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 2.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 2.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m16 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .true.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 2.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.07
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 2.0
+TSHIFT_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.0
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.85
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 2.5
+SNR_MAX_BASE = 3.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 4.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 1.0
+C_1 (small windows) = 5.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 4.0
+C_3b (separation time) = 2.5
+C_4a (curtail on left) = 2.0
+C_4b (curtail on right) = 6.0
+
+WEIGHT_SPACE_COVERAGE = 1.0
+WEIGHT_AVERAGE_CC = 1.0
+WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m99
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m99 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T030_m99 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 1.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_Daniel
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_Daniel 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_Daniel 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,68 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .false.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 2.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 1.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 5.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 5.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m00_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 6.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m01
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m01 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m01 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m02
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m02 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m02 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m03
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m03 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m03 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m04
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m04 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m04 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m05
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m05 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m05 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m06
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m06 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T002_T040_m06 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 2.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.07
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.85
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.0
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 5.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m00 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .true.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 3.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.11
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 4.0
+TSHIFT_REFERENCE = 2.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.0
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.80
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 2.5
+SNR_MAX_BASE = 3.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 4.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 1.3
+C_1 (small windows) = 4.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 4.0
+C_3b (separation time) = 2.5
+C_4a (curtail on left) = 2.0
+C_4b (curtail on right) = 6.0
+
+WEIGHT_SPACE_COVERAGE = 0.70
+WEIGHT_AVERAGE_CC = 0.25
+WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m01_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m02_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m03_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m04_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m05
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m05 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m05 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m06
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m06 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m06 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m07_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m08_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m09_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m10_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m11
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m11 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m11 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m12
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m12 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m12 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m13
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m13 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m13 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m14
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m14 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m14 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m15
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m15 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m15 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 3.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m16 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .true.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 3.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.11
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 3.0
+TSHIFT_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.0
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.80
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 2.5
+SNR_MAX_BASE = 3.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 4.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 1.3
+C_1 (small windows) = 4.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 4.0
+C_3b (separation time) = 2.5
+C_4a (curtail on left) = 2.0
+C_4b (curtail on right) = 6.0
+
+WEIGHT_SPACE_COVERAGE = 0.70
+WEIGHT_AVERAGE_CC = 0.25
+WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m99
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m99 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T003_T030_m99 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .true.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 3.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.11
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.0
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.80
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 2.5
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 4.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 1.3
-C_1 (small windows) = 4.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 4.0
-C_3b (separation time) = 2.5
-C_4a (curtail on left) = 2.0
-C_4b (curtail on right) = 6.0
-
-WEIGHT_SPACE_COVERAGE = 0.70
-WEIGHT_AVERAGE_CC = 0.25
-WEIGHT_N_WINDOWS = 0.05
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 5.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .false.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 6.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.18
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 5.0
+TSHIFT_REFERENCE = 2.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.5
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.71
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 3.0
+SNR_MAX_BASE = 2.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 3.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 0.7
+C_1 (small windows) = 2.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 3.0
+C_3b (separation time) = 2.0
+C_4a (curtail on left) = 2.5
+C_4b (curtail on right) = 12.0
+
+WEIGHT_SPACE_COVERAGE = 0.5
+WEIGHT_AVERAGE_CC = 1.0
+WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 6.0
-TSHIFT_REFERENCE = 3.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_09s 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .false.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 6.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.18
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 6.0
+TSHIFT_REFERENCE = 3.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.5
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.71
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 3.0
+SNR_MAX_BASE = 2.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 3.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 0.7
+C_1 (small windows) = 2.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 3.0
+C_3b (separation time) = 2.0
+C_4a (curtail on left) = 2.5
+C_4b (curtail on right) = 12.0
+
+WEIGHT_SPACE_COVERAGE = 0.5
+WEIGHT_AVERAGE_CC = 1.0
+WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 8.0
-TSHIFT_REFERENCE = 4.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m00_12s 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .false.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 6.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.18
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 8.0
+TSHIFT_REFERENCE = 4.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.5
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.71
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 3.0
+SNR_MAX_BASE = 2.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 3.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 0.7
+C_1 (small windows) = 2.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 3.0
+C_3b (separation time) = 2.0
+C_4a (curtail on left) = 2.5
+C_4b (curtail on right) = 12.0
+
+WEIGHT_SPACE_COVERAGE = 0.5
+WEIGHT_AVERAGE_CC = 1.0
+WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m01
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m01 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m01 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 5.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m02
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m02 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m02 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 5.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m03
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m03 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m03 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 5.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m04
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m04 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m04 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 5.0
-TSHIFT_REFERENCE = 2.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m05
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m05 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m05 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m06
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m06 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m06 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 1.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m07_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m08_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m09_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m10_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m11_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m12_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m13
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m13 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m13 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m14
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m14 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m14 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m15
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m15 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m15 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 4.0
-TSHIFT_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m16 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,71 @@
+# -------------------------------------------------------------
+#
+# This is the parameter file for FLEXWIN. It is based on the
+# same syntax as the Par_file for SPECFEM. Variable names are
+# put first, values are placed after the 34th column.
+#
+# Comment lines and blank lines are significant. If you
+# change the layout of this file or add/remove parameters
+# you must also modify the user_variables module and the
+# read_parameter_file subroutine at the start of seismo_subs.f90.
+#
+# -------------------------------------------------------------
+
+# -------------------------------------------------------------
+# boolean parameters
+DEBUG = .true.
+MAKE_SEISMO_PLOTS = .true.
+MAKE_WINDOW_FILES = .true.
+BODY_WAVE_ONLY = .false.
+
+# -------------------------------------------------------------
+# period min/max for filtering
+RUN_BANDPASS = .false.
+WIN_MIN_PERIOD = 6.00
+WIN_MAX_PERIOD = 30.00
+
+# -------------------------------------------------------------
+# E(t) water level
+STALTA_BASE = 0.18
+
+# -------------------------------------------------------------
+# maximum allowable time shift from reference TSHIFT
+TSHIFT_BASE = 4.0
+TSHIFT_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# maximum allowable amplitude measurement relative to reference DLNA
+DLNA_BASE = 1.5
+DLNA_REFERENCE = 0.0
+
+# -------------------------------------------------------------
+# limit on CC for window acceptance
+CC_BASE = 0.71
+
+# -------------------------------------------------------------
+# boolean switch for check_data_quality
+DATA_QUALITY = .true.
+
+# if DATA_QUALITY = .true. and if two different measurements of
+# signal-to-noise ratios exceeds these two base levels,
+# then the data time series (and syn) is kept
+SNR_INTEGRATE_BASE = 3.0
+SNR_MAX_BASE = 2.5
+
+# -------------------------------------------------------------
+# limit on signal to noise ratio in a particular window.
+WINDOW_SNR_BASE = 3.0
+
+# -------------------------------------------------------------
+# Fine tuning constants
+C_0 (internal minima) = 0.7
+C_1 (small windows) = 2.0
+C_2 (prominence) = 0.0
+C_3a (separation height) = 3.0
+C_3b (separation time) = 2.0
+C_4a (curtail on left) = 2.5
+C_4b (curtail on right) = 12.0
+
+WEIGHT_SPACE_COVERAGE = 0.5
+WEIGHT_AVERAGE_CC = 1.0
+WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m99
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m99 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T030_m99 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,71 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 30.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# maximum allowable time shift from reference TSHIFT
-TSHIFT_BASE = 8.0
-TSHIFT_REFERENCE = 4.0
-
-# -------------------------------------------------------------
-# maximum allowable amplitude measurement relative to reference DLNA
-DLNA_BASE = 1.5
-DLNA_REFERENCE = 0.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 3.0
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 0.5
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.7
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_Daniel
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_Daniel 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_Daniel 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .false.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level
-STALTA_BASE = 0.23
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 3.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.7
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.0
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 1.5
-C_2 (prominence) = 0.3
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 1.5
-C_4b (curtail on right) = 4.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 1.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m00_orig
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m00_orig 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m00_orig 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 10.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m01
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m01 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m01 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.22
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 5.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.74
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m02
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m02 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m02 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.22
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 5.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.74
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m03
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m03 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m03 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.22
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 5.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.74
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m04
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m04 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m04 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.22
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.74
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m05
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m05 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m05 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.22
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.74
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m06
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m06 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m06 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.22
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.74
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 3.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m07
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m07 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/PAR_FILE_T006_T040_m07 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,69 +0,0 @@
-# -------------------------------------------------------------
-#
-# This is the parameter file for FLEXWIN. It is based on the
-# same syntax as the Par_file for SPECFEM. Variable names are
-# put first, values are placed after the 34th column.
-#
-# Comment lines and blank lines are significant. If you
-# change the layout of this file or add/remove parameters
-# you must also modify the user_variables module and the
-# read_parameter_file subroutine at the start of seismo_subs.f90.
-#
-# -------------------------------------------------------------
-
-# -------------------------------------------------------------
-# boolean parameters
-DEBUG = .true.
-MAKE_SEISMO_PLOTS = .true.
-MAKE_WINDOW_FILES = .true.
-BODY_WAVE_ONLY = .false.
-
-# -------------------------------------------------------------
-# period min/max for filtering
-RUN_BANDPASS = .false.
-WIN_MIN_PERIOD = 6.00
-WIN_MAX_PERIOD = 40.00
-
-# -------------------------------------------------------------
-# E(t) water level (0.23)
-STALTA_BASE = 0.18
-
-# -------------------------------------------------------------
-# TSHIFT
-TSHIFT_BASE = 4.0
-
-# -------------------------------------------------------------
-# limit on CC for window acceptance
-CC_BASE = 0.71
-
-# -------------------------------------------------------------
-# limit on dlnA (dA/A) for window acceptance
-DLNA_BASE = 1.5
-
-# -------------------------------------------------------------
-# boolean switch for check_data_quality
-DATA_QUALITY = .true.
-
-# if DATA_QUALITY = .true. and if two different measurements of
-# signal-to-noise ratios exceeds these two base levels,
-# then the data time series (and syn) is kept
-SNR_INTEGRATE_BASE = 3.0
-SNR_MAX_BASE = 2.5
-
-# -------------------------------------------------------------
-# limit on signal to noise ratio in a particular window.
-WINDOW_SNR_BASE = 2.5
-
-# -------------------------------------------------------------
-# Fine tuning constants
-C_0 (internal minima) = 0.7
-C_1 (small windows) = 2.0
-C_2 (prominence) = 0.0
-C_3a (separation height) = 3.0
-C_3b (separation time) = 2.0
-C_4a (curtail on left) = 2.5
-C_4b (curtail on right) = 12.0
-
-WEIGHT_SPACE_COVERAGE = 1.0
-WEIGHT_AVERAGE_CC = 0.0
-WEIGHT_N_WINDOWS = 0.0
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,179 @@
+! -------------------------------------------------------------
+! edit here to change T0 and T1 on some condition
+! Note, this function is called AFTER the seismogram has been
+! read but before it is filtered.
+! -------------------------------------------------------------
+
+subroutine modify_T0_T1_on_condition
+ use seismo_variables
+
+ ! do nothing
+
+ ! adjust fstart and fend accordingly
+ !FSTART=1./WIN_MAX_PERIOD
+ !FEND=1./WIN_MIN_PERIOD
+
+end subroutine modify_T0_T1_on_condition
+
+! -------------------------------------------------------------
+! Edit here to change the time dependent properties of the selection criteria
+! Note, this function is called AFTER the seismogram has been read.
+! -------------------------------------------------------------
+subroutine set_up_criteria_arrays
+ use seismo_variables
+
+ integer :: i
+ double precision :: time
+
+ double precision :: Pnl_start, S_end, Sw_start, Sw_end
+ double precision :: Nlam, dtresh, vref
+
+!===========================
+
+! -----------------------------------------------------------------
+! This is the basic version of the subroutine - no variation with time
+! -----------------------------------------------------------------
+ do i = 1, npts
+ time = b+(i-1)*dt
+ DLNA_LIMIT(i) = DLNA_BASE
+ CC_LIMIT(i) = CC_BASE
+ TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
+ STALTA_W_LEVEL(i) = STALTA_BASE
+ S2N_LIMIT(i) = WINDOW_S2N_BASE
+ enddo
+
+!!$ if (.not. BODY_WAVE_ONLY) then
+!!$ Pnl_start = -5.0 + dist_km/7.8
+!!$ Sw_start = -15.0 + dist_km/3.5
+!!$ Sw_end = 35.0 + dist_km/3.1
+!!$ else
+!!$ Pnl_start = P_pick - 5.0
+!!$ S_end = S_pick + 5.0
+!!$ Sw_start = -15.0 + dist_km/3.5
+!!$ Sw_end = 35.0 + dist_km/3.1
+!!$ endif
+
+ ! regional (Qinya's formulation):
+ ! -------------------------------------------------------------
+ ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
+ ! that are listed in the publication should not be there
+ ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
+
+ Sw_start = -15.0 + dist_km/3.5
+ Sw_end = 35.0 + dist_km/3.1
+
+ if (BODY_WAVE_ONLY) then
+ !Pnl_start = P_pick - 5.0
+ !S_end = S_pick + 5.0
+ Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
+ S_end = S_pick + 2.5*WIN_MIN_PERIOD
+
+ else
+ Pnl_start = -5.0 + dist_km/7.8
+ S_end = Sw_start
+ endif
+
+ ! variables for signal to noise ratio criteria.
+ signal_end = Sw_end
+ noise_end = Pnl_start
+ if(DEBUG) then
+ if (BODY_WAVE_ONLY) then
+ write(*,*) 'DEBUG : P_pick = ', P_pick
+ write(*,*) 'DEBUG : S_pick = ', S_pick
+ endif
+ write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
+ write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
+ endif
+
+ ! --------------------------------
+ ! modulate criteria in time
+ do i = 1, npts
+ time = b+(i-1)*dt ! time
+
+ ! raises STA/LTA water level before P wave arrival.
+ if(time.lt.Pnl_start) then
+ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+ endif
+
+ ! raises STA/LTA water level after surface wave arrives
+ if (BODY_WAVE_ONLY) then
+ if(time.gt.S_end) then
+ !if(time.gt.Sw_end) then
+ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+ endif
+
+ else
+!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
+!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
+!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
+!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
+!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
+!!$ endif
+!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
+!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
+!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
+!!$ endif
+
+ ! double the STA/LTA water level after the surface waves
+ if(time.gt.Sw_end) then
+ STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
+ endif
+
+!!$ ! allow 100 seconds to possibly capture additional phases
+!!$ if(time.gt. (Sw_end+100.0) ) then
+!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+!!$ endif
+
+ endif
+
+ enddo
+
+ ! --------------------------------
+ ! if the distance to the station is less than N wavelengths, then reject records
+ ! by reasing the entire water level
+
+ Nlam = 1.7 ! number of wavelengths
+ vref = 2.0 ! reference velocity, km/s
+ dtresh = Nlam*WIN_MIN_PERIOD*vref
+ if (dist_km .le. dtresh ) then
+ if(DEBUG) then
+ write(*,*) 'REJECT by raising water level: station is too close for this period range'
+ write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
+ write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
+ endif
+ do i = 1,npts
+ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+ enddo
+ endif
+
+! The following is for check_window quality_s2n
+
+! -----------------------------------------------------------------
+! Start of user-dependent portion
+
+! This is where you modulate the time dependence of the selection
+! criteria. You have access to the following parameters from the
+! seismogram itself:
+!
+! dt, b, kstnm, knetwk, kcmpnm
+! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
+! num_phases, ph_names, ph_times
+!
+! Example of modulation:
+!-----------------------
+! To increase s2n limit after arrival of R1 try
+!
+! R_vel=3.2
+! R_time=dist_km/R_vel
+! do i = 1, npts
+! time=b+(i-1)*dt
+! if (time.gt.R_time) then
+! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
+! endif
+! enddo
+!
+! End of user-dependent portion
+! -----------------------------------------------------------------
+
+end subroutine set_up_criteria_arrays
+! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m00_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,135 +0,0 @@
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- write(*,*) 'DEBUG : P_pick = ', sngl(P_pick)
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
- ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
- ! (see Liu et al., 2004, p. 1755; note comment above)
- if(time.ge.Pnl_start .and. time.lt.Sw_start) then
- !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
- TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
- endif
- if(time.ge.Sw_start .and. time.le.Sw_end) then
- !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
- TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
- endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m01_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,135 +0,0 @@
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- write(*,*) 'DEBUG : P_pick = ', sngl(P_pick)
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m02_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,135 +0,0 @@
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- write(*,*) 'DEBUG : P_pick = ', sngl(P_pick)
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m03_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,135 +0,0 @@
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- write(*,*) 'DEBUG : P_pick = ', sngl(P_pick)
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m04_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,135 +0,0 @@
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- write(*,*) 'DEBUG : P_pick = ', sngl(P_pick)
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m05_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,135 +0,0 @@
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- write(*,*) 'DEBUG : P_pick = ', sngl(P_pick)
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m06_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,135 +0,0 @@
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- write(*,*) 'DEBUG : P_pick = ', sngl(P_pick)
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m07_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,161 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow for 100s to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m08_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,161 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow for 100s to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m09_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,161 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow for 100s to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m10_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,161 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- ! for qinya's scsn picking
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow for 100s to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m11_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow for 100s to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12_orig.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12_orig.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m12_orig.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m13.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m13.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m13.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m14.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m14.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m14.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m15.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m15.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m15.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,181 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
- ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
- if (BODY_WAVE_ONLY) then
- !if(time.gt.S_end) then
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- !if(time.gt.Sw_end) then
- ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
- !endif
-
- ! allow 100 seconds to possibly capture additional phases
- if(time.gt. (Sw_end+100.0) ) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
Added: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90 (rev 0)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m16.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -0,0 +1,181 @@
+! -------------------------------------------------------------
+! edit here to change T0 and T1 on some condition
+! Note, this function is called AFTER the seismogram has been
+! read but before it is filtered.
+! -------------------------------------------------------------
+
+subroutine modify_T0_T1_on_condition
+ use seismo_variables
+
+ ! do nothing
+
+ ! adjust fstart and fend accordingly
+ !FSTART=1./WIN_MAX_PERIOD
+ !FEND=1./WIN_MIN_PERIOD
+
+end subroutine modify_T0_T1_on_condition
+
+! -------------------------------------------------------------
+! Edit here to change the time dependent properties of the selection criteria
+! Note, this function is called AFTER the seismogram has been read.
+! -------------------------------------------------------------
+subroutine set_up_criteria_arrays
+ use seismo_variables
+
+ integer :: i
+ double precision :: time
+
+ double precision :: Pnl_start, S_end, Sw_start, Sw_end
+ double precision :: Nlam, dtresh, vref
+
+!===========================
+
+! -----------------------------------------------------------------
+! This is the basic version of the subroutine - no variation with time
+! -----------------------------------------------------------------
+ do i = 1, npts
+ time = b+(i-1)*dt
+ DLNA_LIMIT(i) = DLNA_BASE
+ CC_LIMIT(i) = CC_BASE
+ TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
+ STALTA_W_LEVEL(i) = STALTA_BASE
+ S2N_LIMIT(i) = WINDOW_S2N_BASE
+ enddo
+
+!!$ if (.not. BODY_WAVE_ONLY) then
+!!$ Pnl_start = -5.0 + dist_km/7.8
+!!$ Sw_start = -15.0 + dist_km/3.5
+!!$ Sw_end = 35.0 + dist_km/3.1
+!!$ else
+!!$ Pnl_start = P_pick - 5.0
+!!$ S_end = S_pick + 5.0
+!!$ Sw_start = -15.0 + dist_km/3.5
+!!$ Sw_end = 35.0 + dist_km/3.1
+!!$ endif
+
+ ! regional (Qinya's formulation):
+ ! -------------------------------------------------------------
+ ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
+ ! that are listed in the publication should not be there
+ ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
+
+ Sw_start = -15.0 + dist_km/3.5
+ Sw_end = 35.0 + dist_km/3.1
+
+ if (BODY_WAVE_ONLY) then
+ !Pnl_start = P_pick - 5.0
+ !S_end = S_pick + 5.0
+ Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
+ S_end = S_pick + 2.5*WIN_MIN_PERIOD
+
+ else
+ Pnl_start = -5.0 + dist_km/7.8
+ S_end = Sw_start
+ endif
+
+ ! variables for signal to noise ratio criteria.
+ signal_end = Sw_end
+ noise_end = Pnl_start
+ if(DEBUG) then
+ if (BODY_WAVE_ONLY) then
+ write(*,*) 'DEBUG : P_pick = ', P_pick
+ write(*,*) 'DEBUG : S_pick = ', S_pick
+ endif
+ write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
+ write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
+ endif
+
+ ! --------------------------------
+ ! modulate criteria in time
+ do i = 1, npts
+ time = b+(i-1)*dt ! time
+
+ ! raises STA/LTA water level before P wave arrival.
+ if(time.lt.Pnl_start) then
+ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+ endif
+
+ ! raises STA/LTA water level after surface wave arrives
+ ! NOTE: CHT is effectively no longer using BODY_WAVE mode at all,
+ ! but for the 2s data, we do not look AFTER the surface waves for exotic phases.
+ if (BODY_WAVE_ONLY) then
+ !if(time.gt.S_end) then
+ if(time.gt.Sw_end) then
+ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+ endif
+
+ else
+!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
+!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
+!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
+!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
+!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
+!!$ endif
+!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
+!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
+!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
+!!$ endif
+
+ ! double the STA/LTA water level after the surface waves
+ !if(time.gt.Sw_end) then
+ ! STALTA_W_LEVEL(i) = 2.0*STALTA_BASE
+ !endif
+
+ ! allow 100 seconds to possibly capture additional phases
+ if(time.gt. (Sw_end+100.0) ) then
+ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+ endif
+
+ endif
+
+ enddo
+
+ ! --------------------------------
+ ! if the distance to the station is less than N wavelengths, then reject records
+ ! by reasing the entire water level
+
+ Nlam = 1.7 ! number of wavelengths
+ vref = 2.0 ! reference velocity, km/s
+ dtresh = Nlam*WIN_MIN_PERIOD*vref
+ if (dist_km .le. dtresh ) then
+ if(DEBUG) then
+ write(*,*) 'REJECT by raising water level: station is too close for this period range'
+ write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
+ write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
+ endif
+ do i = 1,npts
+ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
+ enddo
+ endif
+
+! The following is for check_window quality_s2n
+
+! -----------------------------------------------------------------
+! Start of user-dependent portion
+
+! This is where you modulate the time dependence of the selection
+! criteria. You have access to the following parameters from the
+! seismogram itself:
+!
+! dt, b, kstnm, knetwk, kcmpnm
+! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
+! num_phases, ph_names, ph_times
+!
+! Example of modulation:
+!-----------------------
+! To increase s2n limit after arrival of R1 try
+!
+! R_vel=3.2
+! R_time=dist_km/R_vel
+! do i = 1, npts
+! time=b+(i-1)*dt
+! if (time.gt.R_time) then
+! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
+! endif
+! enddo
+!
+! End of user-dependent portion
+! -----------------------------------------------------------------
+
+end subroutine set_up_criteria_arrays
+! -------------------------------------------------------------
Deleted: seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m99.f90
===================================================================
--- seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m99.f90 2009-03-27 19:53:17 UTC (rev 14489)
+++ seismo/3D/ADJOINT_TOMO/flexwin/user_files/socal_3D/user_functions_m99.f90 2009-03-27 20:05:55 UTC (rev 14490)
@@ -1,179 +0,0 @@
-! -------------------------------------------------------------
-! edit here to change T0 and T1 on some condition
-! Note, this function is called AFTER the seismogram has been
-! read but before it is filtered.
-! -------------------------------------------------------------
-
-subroutine modify_T0_T1_on_condition
- use seismo_variables
-
- ! do nothing
-
- ! adjust fstart and fend accordingly
- !FSTART=1./WIN_MAX_PERIOD
- !FEND=1./WIN_MIN_PERIOD
-
-end subroutine modify_T0_T1_on_condition
-
-! -------------------------------------------------------------
-! Edit here to change the time dependent properties of the selection criteria
-! Note, this function is called AFTER the seismogram has been read.
-! -------------------------------------------------------------
-subroutine set_up_criteria_arrays
- use seismo_variables
-
- integer :: i
- double precision :: time
-
- double precision :: Pnl_start, S_end, Sw_start, Sw_end
- double precision :: Nlam, dtresh, vref
-
-!===========================
-
-! -----------------------------------------------------------------
-! This is the basic version of the subroutine - no variation with time
-! -----------------------------------------------------------------
- do i = 1, npts
- time = b+(i-1)*dt
- DLNA_LIMIT(i) = DLNA_BASE
- CC_LIMIT(i) = CC_BASE
- TSHIFT_LIMIT(i) = TSHIFT_BASE ! WIN_MIN_PERIOD/2.0
- STALTA_W_LEVEL(i) = STALTA_BASE
- S2N_LIMIT(i) = WINDOW_S2N_BASE
- enddo
-
-!!$ if (.not. BODY_WAVE_ONLY) then
-!!$ Pnl_start = -5.0 + dist_km/7.8
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ else
-!!$ Pnl_start = P_pick - 5.0
-!!$ S_end = S_pick + 5.0
-!!$ Sw_start = -15.0 + dist_km/3.5
-!!$ Sw_end = 35.0 + dist_km/3.1
-!!$ endif
-
- ! regional (Qinya's formulation):
- ! -------------------------------------------------------------
- ! see Liu et al. (2004), p. 1755, but note that the PARENTHESES
- ! that are listed in the publication should not be there
- ! THESE ARE PROBABLY NOT ACCURATE ENOUGH FOR LONGER PATHS.
-
- Sw_start = -15.0 + dist_km/3.5
- Sw_end = 35.0 + dist_km/3.1
-
- if (BODY_WAVE_ONLY) then
- !Pnl_start = P_pick - 5.0
- !S_end = S_pick + 5.0
- Pnl_start = P_pick - 2.5*WIN_MIN_PERIOD
- S_end = S_pick + 2.5*WIN_MIN_PERIOD
-
- else
- Pnl_start = -5.0 + dist_km/7.8
- S_end = Sw_start
- endif
-
- ! variables for signal to noise ratio criteria.
- signal_end = Sw_end
- noise_end = Pnl_start
- if(DEBUG) then
- if (BODY_WAVE_ONLY) then
- write(*,*) 'DEBUG : P_pick = ', P_pick
- write(*,*) 'DEBUG : S_pick = ', S_pick
- endif
- write(*,*) 'DEBUG : signal_end = ', sngl(signal_end)
- write(*,*) 'DEBUG : noise_end = ', sngl(noise_end)
- endif
-
- ! --------------------------------
- ! modulate criteria in time
- do i = 1, npts
- time = b+(i-1)*dt ! time
-
- ! raises STA/LTA water level before P wave arrival.
- if(time.lt.Pnl_start) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- ! raises STA/LTA water level after surface wave arrives
- if (BODY_WAVE_ONLY) then
- if(time.gt.S_end) then
- !if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- endif
-
- else
-!!$ ! set time- and distance-specific Tshift and DlnA to mimic Qinya's criteria
-!!$ ! (see Liu et al., 2004, p. 1755; note comment above)
-!!$ if(time.ge.Pnl_start .and. time.lt.Sw_start) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/80.0
-!!$ endif
-!!$ if(time.ge.Sw_start .and. time.le.Sw_end) then
-!!$ !DLNA_LIMIT(i) = 1.5 ! ratio is 2.5, and dlna is ratio-1
-!!$ TSHIFT_LIMIT(i) = 3.0 + dist_km/50.0
-!!$ endif
-
- ! double the STA/LTA water level after the surface waves
- if(time.gt.Sw_end) then
- STALTA_W_LEVEL(i) = 10.0*STALTA_BASE
- endif
-
-!!$ ! allow 100 seconds to possibly capture additional phases
-!!$ if(time.gt. (Sw_end+100.0) ) then
-!!$ STALTA_W_LEVEL(i) = 10.*STALTA_BASE
-!!$ endif
-
- endif
-
- enddo
-
- ! --------------------------------
- ! if the distance to the station is less than N wavelengths, then reject records
- ! by reasing the entire water level
-
- Nlam = 1.7 ! number of wavelengths
- vref = 2.0 ! reference velocity, km/s
- dtresh = Nlam*WIN_MIN_PERIOD*vref
- if (dist_km .le. dtresh ) then
- if(DEBUG) then
- write(*,*) 'REJECT by raising water level: station is too close for this period range'
- write(*,*) 'dist_km, dtresh = Nlam*WIN_MIN_PERIOD, Nlam, WIN_MIN_PERIOD :'
- write(*,'(4f12.4)') dist_km, dtresh, Nlam, WIN_MIN_PERIOD
- endif
- do i = 1,npts
- STALTA_W_LEVEL(i) = 10.*STALTA_BASE
- enddo
- endif
-
-! The following is for check_window quality_s2n
-
-! -----------------------------------------------------------------
-! Start of user-dependent portion
-
-! This is where you modulate the time dependence of the selection
-! criteria. You have access to the following parameters from the
-! seismogram itself:
-!
-! dt, b, kstnm, knetwk, kcmpnm
-! evla, evlo, stla, stlo, evdp, azimuth, backazimuth, dist_deg, dist_km
-! num_phases, ph_names, ph_times
-!
-! Example of modulation:
-!-----------------------
-! To increase s2n limit after arrival of R1 try
-!
-! R_vel=3.2
-! R_time=dist_km/R_vel
-! do i = 1, npts
-! time=b+(i-1)*dt
-! if (time.gt.R_time) then
-! S2N_LIMIT(i)=2*WINDOW_S2N_BASE
-! endif
-! enddo
-!
-! End of user-dependent portion
-! -----------------------------------------------------------------
-
-end subroutine set_up_criteria_arrays
-! -------------------------------------------------------------
More information about the CIG-COMMITS
mailing list