[cig-commits] r16995 - in short/3D/PyLith/trunk/doc/userguide: . boundaryconditions tutorials tutorials/3dhex8 tutorials/3dhex8/friction tutorials/3dhex8/gravity tutorials/3dhex8/quasistatic tutorials/3dhex8/quasistatic/figs tutorials/3dhex8/static tutorials/shearwave

brad at geodynamics.org brad at geodynamics.org
Fri Jun 11 13:41:24 PDT 2010 

Author: brad
Date: 2010-06-11 13:41:23 -0700 (Fri, 11 Jun 2010)
New Revision: 16995

Modified:
   short/3D/PyLith/trunk/doc/userguide/boundaryconditions/boundaryconditions.lyx
   short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/3dhex8.lyx
   short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/friction/friction.lyx
   short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/gravity/gravity.lyx
   short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/quasistatic/figs/step08-strain-displ-t150.jpg
   short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/quasistatic/quasistatic.lyx
   short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/static/static.lyx
   short/3D/PyLith/trunk/doc/userguide/tutorials/shearwave/quad4.lyx
   short/3D/PyLith/trunk/doc/userguide/tutorials/tutorials.lyx
   short/3D/PyLith/trunk/doc/userguide/userguide.lyx
Log:
Fixed formatting issues.

Modified: short/3D/PyLith/trunk/doc/userguide/boundaryconditions/boundaryconditions.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/boundaryconditions/boundaryconditions.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/boundaryconditions/boundaryconditions.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -6008,7 +6008,7 @@
 An example problem using gravity is described in Section 
 \begin_inset CommandInset ref
 LatexCommand ref
-reference "sec:Tutorial-3d-hex8"
+reference "sec:Tutorial-3d-hex8-gravity"
 
 \end_inset
 

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/3dhex8.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/3dhex8.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/3dhex8.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -1,4 +1,4 @@
-#LyX 1.6.6 created this file. For more info see http://www.lyx.org/
+#LyX 1.6.4 created this file. For more info see http://www.lyx.org/
 \lyxformat 345
 \begin_document
 \begin_header

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/friction/friction.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/friction/friction.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/friction/friction.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -1,4 +1,4 @@
-#LyX 1.6.6 created this file. For more info see http://www.lyx.org/
+#LyX 1.6.4 created this file. For more info see http://www.lyx.org/
 \lyxformat 345
 \begin_document
 \begin_header
@@ -380,6 +380,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step10-fault-traction-slip.jpg
 	width 10cm
@@ -537,6 +538,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step11-fault-traction-slip.jpg
 	width 10cm
@@ -767,6 +769,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step12-displ-t200.jpg
 	width 10cm
@@ -887,8 +890,11 @@
 \end_layout
 
 \begin_layout LyX-Code
-friction.db_properties.values = [static-coefficient,dynamic-coefficient,slip-weake
-ning-parameter,cohesion]
+friction.db_properties.values = [static-coefficient,dynamic-coefficient,
+\begin_inset Newline newline
+\end_inset
+
+slip-weakening-parameter,cohesion]
 \end_layout
 
 \begin_layout LyX-Code
@@ -923,6 +929,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step13-displ-t200.jpg
 	width 10cm
@@ -1053,8 +1060,12 @@
 
 \begin_layout LyX-Code
 friction.db_properties.values = [reference-friction-coefficient,reference-slip-rat
-e,characteristic-slip-distance,constitutive-parameter-a,constitutive-parameter-b
-,cohesion]
+e,
+\begin_inset Newline newline
+\end_inset
+
+characteristic-slip-distance,constitutive-parameter-a,constitutive-parameter-b,c
+ohesion]
 \end_layout
 
 \begin_layout LyX-Code
@@ -1117,6 +1128,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step14-displ-t200.jpg
 	width 10cm

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/gravity/gravity.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/gravity/gravity.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/gravity/gravity.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -1,4 +1,4 @@
-#LyX 1.6.6 created this file. For more info see http://www.lyx.org/
+#LyX 1.6.4 created this file. For more info see http://www.lyx.org/
 \lyxformat 345
 \begin_document
 \begin_header
@@ -299,6 +299,9 @@
 
 \begin_layout LyX-Code
 output.cell_data_fields = [total_strain,stress,viscous_strain_1,viscous_strain_2,
+\begin_inset Newline newline
+\end_inset
+
 viscous_strain_3]
 \end_layout
 
@@ -336,6 +339,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step15-displ-t200.jpg
 	width 10cm
@@ -512,6 +516,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step16-stress_xx-t200.jpg
 	width 10cm
@@ -655,6 +660,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step17-displ-t200.jpg
 	width 10cm

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/quasistatic/figs/step08-strain-displ-t150.jpg
===================================================================
(Binary files differ)

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/quasistatic/quasistatic.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/quasistatic/quasistatic.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/quasistatic/quasistatic.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -1,4 +1,4 @@
-#LyX 1.6.6 created this file. For more info see http://www.lyx.org/
+#LyX 1.6.4 created this file. For more info see http://www.lyx.org/
 \lyxformat 345
 \begin_document
 \begin_header
@@ -573,6 +573,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step04-displ-t200.jpg
 	width 10cm
@@ -711,7 +712,11 @@
 
 \begin_layout LyX-Code
 db_rate.values = [traction-rate-shear-horiz,traction-rate-shear-vert,traction-rat
-e-normal,rate-start-time]
+e-normal,
+\begin_inset Newline newline
+\end_inset
+
+rate-start-time]
 \end_layout
 
 \begin_layout LyX-Code
@@ -807,6 +812,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step05-displ-t40.jpg
 	width 10cm
@@ -1131,9 +1137,15 @@
 \end_layout
 
 \begin_layout LyX-Code
-output.vertex_info_fields = [normal_dir,strike_dir,dip_dir,final_slip_creep,final
-_slip_one,final_slip_two,final_slip_three,slip_time_creep,slip_time_one,slip_tim
-e_two,slip_time_three]
+output.vertex_info_fields = [normal_dir,strike_dir,dip_dir,final_slip_creep,
+\begin_inset Newline newline
+\end_inset
+
+final_slip_one,final_slip_two,final_slip_three,slip_time_creep,slip_time_one,
+\begin_inset Newline newline
+\end_inset
+
+slip_time_two,slip_time_three]
 \end_layout
 
 \begin_layout Standard
@@ -1168,6 +1180,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step06-displ-t300.jpg
 	width 10cm
@@ -1462,6 +1475,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step07-displ-vel-t300.jpg
 	width 10cm
@@ -1667,7 +1681,11 @@
 
 \begin_layout Standard
 This will cause the code to automatically read the parameters in powerlaw_gendb.c
-fg, and the file 
+fg, and the file
+\begin_inset Newline newline
+\end_inset
+
+ 
 \family typewriter
 examples/3d/hex8/spatialdb/mat_powerlaw.spatialdb
 \family default
@@ -1827,7 +1845,11 @@
 
 \begin_layout LyX-Code
 output.cell_info_fields = [density,mu,lambda,reference_strain_rate,reference_stre
-ss,power_law_exponent]
+ss,
+\begin_inset Newline newline
+\end_inset
+
+power_law_exponent]
 \end_layout
 
 \begin_layout LyX-Code
@@ -1859,6 +1881,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step08-strain-displ-t150.jpg
 	width 10cm
@@ -2129,8 +2152,9 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
-	filename /Users/charlesw/geoframe/cig/short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/quasistatic/figs/step08-strain-displ-t150.jpg
+	filename figs/step08-strain-displ-t150.jpg
 	width 10cm
 
 \end_inset

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/static/static.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/static/static.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/tutorials/3dhex8/static/static.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -1,4 +1,4 @@
-#LyX 1.6.6 created this file. For more info see http://www.lyx.org/
+#LyX 1.6.4 created this file. For more info see http://www.lyx.org/
 \lyxformat 345
 \begin_document
 \begin_header
@@ -378,6 +378,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step01-displ.jpg
 	width 10cm
@@ -574,6 +575,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step02-displ.jpg
 	width 10cm
@@ -801,6 +803,7 @@
 status open
 
 \begin_layout Plain Layout
+\align center
 \begin_inset Graphics
 	filename figs/step03-displ.jpg
 	width 10cm

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/shearwave/quad4.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/tutorials/shearwave/quad4.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/tutorials/shearwave/quad4.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -1,4 +1,4 @@
-#LyX 1.6.5 created this file. For more info see http://www.lyx.org/
+#LyX 1.6.4 created this file. For more info see http://www.lyx.org/
 \lyxformat 345
 \begin_document
 \begin_header
@@ -455,7 +455,10 @@
 
 \begin_layout LyX-Code
 vertex_info_fields = [strike_dir,normal_dir,initial_traction,static_coefficient,
- dynamic_coefficient,slip_weakening_parameter,cohesion]
+\begin_inset Newline newline
+\end_inset
+
+dynamic_coefficient,slip_weakening_parameter,cohesion]
 \end_layout
 
 \begin_layout LyX-Code

Modified: short/3D/PyLith/trunk/doc/userguide/tutorials/tutorials.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/tutorials/tutorials.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/tutorials/tutorials.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -208,14 +208,14 @@
 
 \begin_inset CommandInset include
 LatexCommand input
-filename "3dhex8/3dhex8.lyx"
+filename "3dtet4/3dtet4.lyx"
 
 \end_inset
 
 
 \begin_inset CommandInset include
 LatexCommand input
-filename "3dtet4/3dtet4.lyx"
+filename "3dhex8/3dhex8.lyx"
 
 \end_inset
 

Modified: short/3D/PyLith/trunk/doc/userguide/userguide.lyx
===================================================================
--- short/3D/PyLith/trunk/doc/userguide/userguide.lyx	2010-06-11 19:00:43 UTC (rev 16994)
+++ short/3D/PyLith/trunk/doc/userguide/userguide.lyx	2010-06-11 20:41:23 UTC (rev 16995)
@@ -1,4 +1,4 @@
-#LyX 1.6.6 created this file. For more info see http://www.lyx.org/
+#LyX 1.6.4 created this file. For more info see http://www.lyx.org/
 \lyxformat 345
 \begin_document
 \begin_header
@@ -743,7 +743,7 @@
 
 \end_inset
 
-> Kaneko, Y., N.
+Kaneko, Y., N.
  Lapusta, and J.-P.
  Ampuero (2008), Spectral element modeling of spontaneous earthquake rupture
  on rate and state faults: Effect of velocity-strengthening friction at

More information about the CIG-COMMITS mailing list