[cig-commits] r18931 - short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters
willic3 at geodynamics.org
willic3 at geodynamics.org
Sat Sep 17 18:25:45 PDT 2011
Author: willic3
Date: 2011-09-17 18:25:44 -0700 (Sat, 17 Sep 2011)
New Revision: 18931
Added:
short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture_lock20.spatialdb
short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/lock20.cfg
Removed:
short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture.spatialdb
short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/timedep.cfg
Modified:
short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/sliprate_creep.spatialdb
Log:
Started cleaning up and fixing parameters for S&P benchmark.
Deleted: short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture.spatialdb
===================================================================
--- short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture.spatialdb 2011-09-17 21:16:13 UTC (rev 18930)
+++ short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture.spatialdb 2011-09-18 01:25:44 UTC (rev 18931)
@@ -1,32 +0,0 @@
-// -*- C++ -*- (tell Emacs to use C++ mode for syntax highlighting)
-//
-// This spatial database specifies the distribution of slip on the
-// fault surface. We apply 4.0 m of left-lateral slip, corresponding to
-// the accumulated slip deficit assuming a slip rate of 2 cm/yr over
-// 200 years. This slip is applied from the surface down to z = -20 km.
-//
-#SPATIAL.ascii 1
-SimpleDB {
- num-values = 3
- value-names = left-lateral-slip reverse-slip fault-opening
- value-units = m m m
- num-locs = 5
- data-dim = 1 // Data is specified along a line.
- space-dim = 3
- cs-data = cartesian {
- to-meters = 1.0e+3 // Specify coordinates in km for convenience.
- space-dim = 3
- } // cs-data
-} // SimpleDB
-// Columns are
-// (1) x coordinate (km)
-// (2) y coordinate (km)
-// (3) z coordinate (km)
-// (4) left-lateral-slip (m) (right-lateral is negative)
-// (5) reverse-slip (m)
-// (6) fault-opening (m)
-0.0 0.0 0.00 4.0 0.0 0.0
-0.0 0.0 -19.00 4.0 0.0 0.0
-0.0 0.0 -20.00 2.0 0.0 0.0
-0.0 0.0 -21.00 0.0 0.0 0.0
-0.0 0.0 -1000.0 0.0 0.0 0.0
Copied: short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture_lock20.spatialdb (from rev 18930, short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture.spatialdb)
===================================================================
--- short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture_lock20.spatialdb (rev 0)
+++ short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/finalslip_rupture_lock20.spatialdb 2011-09-18 01:25:44 UTC (rev 18931)
@@ -0,0 +1,32 @@
+// -*- C++ -*- (tell Emacs to use C++ mode for syntax highlighting)
+//
+// This spatial database specifies the distribution of slip on the
+// fault surface. We apply 4.0 m of left-lateral slip, corresponding to
+// the accumulated slip deficit assuming a slip rate of 2 cm/yr over
+// 200 years. This slip is applied from the surface down to z = -20 km.
+//
+#SPATIAL.ascii 1
+SimpleDB {
+ num-values = 3
+ value-names = left-lateral-slip reverse-slip fault-opening
+ value-units = m m m
+ num-locs = 5
+ data-dim = 1 // Data is specified along a line.
+ space-dim = 3
+ cs-data = cartesian {
+ to-meters = 1.0e+3 // Specify coordinates in km for convenience.
+ space-dim = 3
+ } // cs-data
+} // SimpleDB
+// Columns are
+// (1) x coordinate (km)
+// (2) y coordinate (km)
+// (3) z coordinate (km)
+// (4) left-lateral-slip (m) (right-lateral is negative)
+// (5) reverse-slip (m)
+// (6) fault-opening (m)
+0.0 0.0 0.00 4.0 0.0 0.0
+0.0 0.0 -19.00 4.0 0.0 0.0
+0.0 0.0 -20.00 2.0 0.0 0.0
+0.0 0.0 -21.00 0.0 0.0 0.0
+0.0 0.0 -1000.0 0.0 0.0 0.0
Copied: short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/lock20.cfg (from rev 18930, short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/timedep.cfg)
===================================================================
--- short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/lock20.cfg (rev 0)
+++ short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/lock20.cfg 2011-09-18 01:25:44 UTC (rev 18931)
@@ -0,0 +1,116 @@
+# -*- Python -*-
+[pylithapp]
+
+# This is not a self-contained simulation configuration file. This
+# file only specifies parameters specific to the time-dependent
+# interface conditions. The general parameters are specificed in the
+# pylithapp.cfg file which PyLith reads by default, and the
+# problem-specific parameters are specified in the spbm_xxxx.cfg files.
+#
+# To run the simulation:
+# pylith spbm_xxxx.cfg timedep.cfg
+
+# ----------------------------------------------------------------------
+# faults
+# ----------------------------------------------------------------------
+[pylithapp.timedependent.interfaces.fault]
+output.vertex_info_fields = [normal_dir,strike_dir,dip_dir,final_slip_creep,final_slip_one,final_slip_two,final_slip_three,final_slip_four,final_slip_five,final_slip_six,final_slip_seven,final_slip_eight,final_slip_nine,final_slip_ten,slip_time_creep,slip_time_one,slip_time_two,slip_time_three,slip_time_four,slip_time_five,slip_time_six,slip_time_seven,slip_time_eight,slip_time_nine,slip_time_ten]
+
+# Set earthquake ruptures
+eq_srcs = [creep,one,two,three,four,five,six,seven,eight,nine,ten]
+eq_srcs.creep.origin_time = 00.0*year
+eq_srcs.one.origin_time = 200.0*year
+eq_srcs.two.origin_time = 400.0*year
+eq_srcs.three.origin_time = 600.0*year
+eq_srcs.four.origin_time = 800.0*year
+eq_srcs.five.origin_time = 1000.0*year
+eq_srcs.six.origin_time = 1200.0*year
+eq_srcs.seven.origin_time = 1400.0*year
+eq_srcs.eight.origin_time = 1600.0*year
+eq_srcs.nine.origin_time = 1800.0*year
+eq_srcs.ten.origin_time = 2000.0*year
+
+# one
+[pylithapp.timedependent.interfaces.fault.eq_srcs.one.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# two
+[pylithapp.timedependent.interfaces.fault.eq_srcs.two.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# three
+[pylithapp.timedependent.interfaces.fault.eq_srcs.three.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# four
+[pylithapp.timedependent.interfaces.fault.eq_srcs.four.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# five
+[pylithapp.timedependent.interfaces.fault.eq_srcs.five.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# six
+[pylithapp.timedependent.interfaces.fault.eq_srcs.six.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# seven
+[pylithapp.timedependent.interfaces.fault.eq_srcs.seven.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# eight
+[pylithapp.timedependent.interfaces.fault.eq_srcs.eight.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# nine
+[pylithapp.timedependent.interfaces.fault.eq_srcs.nine.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# ten
+[pylithapp.timedependent.interfaces.fault.eq_srcs.ten.slip_function]
+slip.iohandler.filename = finalslip_rupture.spatialdb
+slip_time.iohandler.filename = sliptime.spatialdb
+
+# creep
+[pylithapp.timedependent.interfaces.fault.eq_srcs.creep]
+slip_function = pylith.faults.ConstRateSlipFn
+origin_time = 0.0*s
+slip_function.slip_rate.iohandler.filename = sliprate_creep.spatialdb
+slip_function.slip_time.iohandler.filename = sliptime.spatialdb
+
+# ----------------------------------------------------------------------
+# output
+# ----------------------------------------------------------------------
+# Specify that output for the entire domain occurs every 50 years.
+[pylithapp.problem.formulation.output.domain]
+output_freq = time_step
+time_step = 50*year
+
+# Specify that output for the ground surface occurs every 10 years.
+[pylithapp.problem.formulation.output.subdomain]
+output_freq = time_step
+time_step = 10*year
+
+# Specify that output for the fault occurs every 10 years.
+[pylithapp.timedependent.interfaces.fault.output]
+output_freq = time_step
+time_step = 10*year
+
+# Specify that output for both materials occurs every 50 years.
+[pylithapp.timedependent.materials.elastic.output]
+output_freq = time_step
+time_step = 50*year
+
+[pylithapp.timedependent.materials.maxwell.output]
+output_freq = time_step
+time_step = 50*year
+
Modified: short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/sliprate_creep.spatialdb
===================================================================
--- short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/sliprate_creep.spatialdb 2011-09-17 21:16:13 UTC (rev 18930)
+++ short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/sliprate_creep.spatialdb 2011-09-18 01:25:44 UTC (rev 18931)
@@ -10,7 +10,7 @@
SimpleDB {
num-values = 3
value-names = left-lateral-slip reverse-slip fault-opening
- value-units = m/s m/s m/s
+ value-units = cm/year cm/year cm/year
num-locs = 8
data-dim = 1 // Values are specified along a line.
space-dim = 3
@@ -28,9 +28,9 @@
// (6) fault-opening rate (m/s)
0.0 0.0 0.00 0.00 0.0 0.0
0.0 0.0 -19.00 0.00 0.0 0.0
-0.0 0.0 -20.00 3.168808781403e-10 0.0 0.0
-0.0 0.0 -21.00 6.337617562806e-10 0.0 0.0
-0.0 0.0 -39.00 6.337617562806e-10 0.0 0.0
-0.0 0.0 -40.00 6.337617562806e-10 0.0 0.0
+0.0 0.0 -20.00 1.00 0.0 0.0
+0.0 0.0 -21.00 2.00 0.0 0.0
+0.0 0.0 -39.00 2.00 0.0 0.0
+0.0 0.0 -40.00 2.00 0.0 0.0
0.0 0.0 -41.00 0.00 0.0 0.0
0.0 0.0 -1000.0 0.00 0.0 0.0
Deleted: short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/timedep.cfg
===================================================================
--- short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/timedep.cfg 2011-09-17 21:16:13 UTC (rev 18930)
+++ short/3D/PyLith/benchmarks/trunk/quasistatic/sceccrustdeform/savageprescott/parameters/timedep.cfg 2011-09-18 01:25:44 UTC (rev 18931)
@@ -1,116 +0,0 @@
-# -*- Python -*-
-[pylithapp]
-
-# This is not a self-contained simulation configuration file. This
-# file only specifies parameters specific to the time-dependent
-# interface conditions. The general parameters are specificed in the
-# pylithapp.cfg file which PyLith reads by default, and the
-# problem-specific parameters are specified in the spbm_xxxx.cfg files.
-#
-# To run the simulation:
-# pylith spbm_xxxx.cfg timedep.cfg
-
-# ----------------------------------------------------------------------
-# faults
-# ----------------------------------------------------------------------
-[pylithapp.timedependent.interfaces.fault]
-output.vertex_info_fields = [normal_dir,strike_dir,dip_dir,final_slip_creep,final_slip_one,final_slip_two,final_slip_three,final_slip_four,final_slip_five,final_slip_six,final_slip_seven,final_slip_eight,final_slip_nine,final_slip_ten,slip_time_creep,slip_time_one,slip_time_two,slip_time_three,slip_time_four,slip_time_five,slip_time_six,slip_time_seven,slip_time_eight,slip_time_nine,slip_time_ten]
-
-# Set earthquake ruptures
-eq_srcs = [creep,one,two,three,four,five,six,seven,eight,nine,ten]
-eq_srcs.creep.origin_time = 00.0*year
-eq_srcs.one.origin_time = 200.0*year
-eq_srcs.two.origin_time = 400.0*year
-eq_srcs.three.origin_time = 600.0*year
-eq_srcs.four.origin_time = 800.0*year
-eq_srcs.five.origin_time = 1000.0*year
-eq_srcs.six.origin_time = 1200.0*year
-eq_srcs.seven.origin_time = 1400.0*year
-eq_srcs.eight.origin_time = 1600.0*year
-eq_srcs.nine.origin_time = 1800.0*year
-eq_srcs.ten.origin_time = 2000.0*year
-
-# one
-[pylithapp.timedependent.interfaces.fault.eq_srcs.one.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# two
-[pylithapp.timedependent.interfaces.fault.eq_srcs.two.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# three
-[pylithapp.timedependent.interfaces.fault.eq_srcs.three.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# four
-[pylithapp.timedependent.interfaces.fault.eq_srcs.four.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# five
-[pylithapp.timedependent.interfaces.fault.eq_srcs.five.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# six
-[pylithapp.timedependent.interfaces.fault.eq_srcs.six.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# seven
-[pylithapp.timedependent.interfaces.fault.eq_srcs.seven.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# eight
-[pylithapp.timedependent.interfaces.fault.eq_srcs.eight.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# nine
-[pylithapp.timedependent.interfaces.fault.eq_srcs.nine.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# ten
-[pylithapp.timedependent.interfaces.fault.eq_srcs.ten.slip_function]
-slip.iohandler.filename = finalslip_rupture.spatialdb
-slip_time.iohandler.filename = sliptime.spatialdb
-
-# creep
-[pylithapp.timedependent.interfaces.fault.eq_srcs.creep]
-slip_function = pylith.faults.ConstRateSlipFn
-origin_time = 0.0*s
-slip_function.slip_rate.iohandler.filename = sliprate_creep.spatialdb
-slip_function.slip_time.iohandler.filename = sliptime.spatialdb
-
-# ----------------------------------------------------------------------
-# output
-# ----------------------------------------------------------------------
-# Specify that output for the entire domain occurs every 50 years.
-[pylithapp.problem.formulation.output.domain]
-output_freq = time_step
-time_step = 50*year
-
-# Specify that output for the ground surface occurs every 10 years.
-[pylithapp.problem.formulation.output.subdomain]
-output_freq = time_step
-time_step = 10*year
-
-# Specify that output for the fault occurs every 10 years.
-[pylithapp.timedependent.interfaces.fault.output]
-output_freq = time_step
-time_step = 10*year
-
-# Specify that output for both materials occurs every 50 years.
-[pylithapp.timedependent.materials.elastic.output]
-output_freq = time_step
-time_step = 50*year
-
-[pylithapp.timedependent.materials.maxwell.output]
-output_freq = time_step
-time_step = 50*year
-
More information about the CIG-COMMITS
mailing list