March 2012 Archives by thread
Starting: Thu Mar 1 03:24:37 PST 2012
Ending: Fri Mar 30 15:50:26 PDT 2012
Messages: 328
- [cig-commits] commit: Do Jacobi or Gauss-Seidel with a compile time flag
Mercurial
- [cig-commits] commit: Use periodic BC on top and bottom. Also go back to computing correction once per iteration, rather than once per sweep
Mercurial
- [cig-commits] r19705 - seismo/3D/SPECFEM3D_GLOBE/branches/SPECFEM3D_GLOBE_SUNFLOWER/src/specfem3D
joseph.charles at geodynamics.org
- [cig-commits] r19706 - short/3D/PyLith/branches/v1.6-stable/share
brad at geodynamics.org
- [cig-commits] r19707 - in short/3D/PyLith/trunk/unittests/libtests/meshio: . data
knepley at geodynamics.org
- [cig-commits] r19708 - in seismo/3D/SPECFEM3D_GLOBE/trunk: doc/USER_MANUAL src/specfem3D
dkomati1 at geodynamics.org
- [cig-commits] commit: Go back to computing correction in place
Mercurial
- [cig-commits] commit: When computing dv_dyy at the interface, weight the high viscosity side more than the low viscosity side. Seems to work up to 10^10 viscosity contrasts
Mercurial
- [cig-commits] r19709 - seismo/3D/SPECFEM3D/trunk/src/meshfem3D
danielpeter at geodynamics.org
- [cig-commits] commit: Clean up
Mercurial
- [cig-commits] commit: Switch to gauss-seidel smoothing. Works for 256x256 up to 10^6 and is faster to boot.
Mercurial
- [cig-commits] r19710 - in seismo/3D/SPECFEM3D_GLOBE/branches/SPECFEM3D_GLOBE_SUNFLOWER/EXAMPLES: . global_s362ani_small global_s362ani_small/DATA
danielpeter at geodynamics.org
- [cig-commits] r19711 - seismo/3D/SPECFEM3D_GLOBE/trunk/doc/USER_MANUAL
dkomati1 at geodynamics.org
- [cig-commits] r19712 - seismo/3D/SPECFEM3D/trunk/doc/USER_MANUAL
dkomati1 at geodynamics.org
- [cig-commits] r19713 - seismo/2D/SPECFEM2D/trunk/doc/USER_MANUAL
dkomati1 at geodynamics.org
- [cig-commits] commit: output pressure at the end
Mercurial
- [cig-commits] commit: Use Neumann boundaries on top and bottom for vx. Also start with zero for initial guess.
Mercurial
- [cig-commits] r19714 - in seismo/3D/SPECFEM3D/trunk: examples/BENCHMARK_CLAERBOUT_ADJOINT/ACOUSTIC/in_data_files/meshfem3D_files examples/BENCHMARK_CLAERBOUT_ADJOINT/ELASTIC/in_data_files/meshfem3D_files examples/meshfem3D_examples/many_interfaces examples/meshfem3D_examples/simple_model examples/meshfem3D_examples/socal1D examples/meshfem3D_examples/socal1D/example_deep examples/meshfem3D_examples/socal1D/example_utm in_data_files/meshfem3D_files src/meshfem3D
danielpeter at geodynamics.org
- [cig-commits] r19715 - seismo/3D/SPECFEM3D_GLOBE/trunk/UTILS/chunk_notes_scanned
dkomati1 at geodynamics.org
- [cig-commits] r19716 - in seismo/3D/SPECFEM3D_GLOBE/trunk: . utils
dkomati1 at geodynamics.org
- [cig-commits] r19717 - seismo/3D/SPECFEM3D_GLOBE/trunk
dkomati1 at geodynamics.org
- [cig-commits] r19718 - in seismo/3D/SPECFEM3D_GLOBE/trunk: . UTILS UTILS/Cluster UTILS/Cluster/CEA_CCRT_Paris UTILS/Cluster/IDRIS UTILS/Cluster/MareNostrum_Barcelona UTILS/Cluster/estimate_best_values_runs UTILS/Cluster/estimate_best_values_runs/scaling_nodes UTILS/Cluster/lsf UTILS/Cluster/lsf/remap_database UTILS/Cluster/pbs UTILS/Cluster/sge UTILS/Profiles UTILS/SeismiQuery UTILS/Visualization UTILS/Visualization/Blender UTILS/Visualization/GMT UTILS/Visualization/Gnuplot UTILS/Visualization/Gnuplot/display_PREM_model UTILS/Visualization/GoogleEarth UTILS/Visualization/Grace UTILS/Visualization/Paraview UTILS/Visualization/Paraview/global_slice_util UTILS/Visualization/Paraview/matlab UTILS/Visualization/Paraview/mesh2vtu UTILS/Visualization/VTK UTILS/Visualization/opendx_AVS UTILS/adjoint_sources UTILS/adjoint_sources/amplitude UTILS/adjoint_sources/traveltime UTILS/attenuation UTILS/central_cube UTILS/chunk_notes_scanned UTILS/collect_database UTILS/doubling_brick UTILS/extract_database UTILS/funaro_routines_bernhard UTILS/lib UTILS/models_1066a_ak135 UTILS/oldstuff UTILS/oldstuff/anisotropy_sebastien UTILS/oldstuff/inline_code UTILS/oldstuff/movie_keken_morin UTILS/oldstuff/older_versions UTILS/oldstuff/tsuboi_movie_feb2004 UTILS/s362ani UTILS/seis_process UTILS/seis_process/asc2sac UTILS/seis_process/sac2asc
dkomati1 at geodynamics.org
- [cig-commits] r19719 - seismo/3D/SPECFEM3D_GLOBE/trunk
dkomati1 at geodynamics.org
- [cig-commits] r19720 - in seismo/3D/SPECFEM3D_GLOBE/trunk: doc utils
dkomati1 at geodynamics.org
- [cig-commits] r19721 - seismo/3D/SPECFEM3D_GLOBE/trunk/doc/chunk_notes_scanned
dkomati1 at geodynamics.org
- [cig-commits] r19722 - in seismo/3D/SPECFEM3D/trunk/doc: . mesh_numbering_convention
dkomati1 at geodynamics.org
- [cig-commits] r19723 - short/3D/PyLith/trunk/unittests/libtests/materials/data
willic3 at geodynamics.org
- [cig-commits] r19724 - short/3D/PyLith/trunk/libsrc/pylith/materials
willic3 at geodynamics.org
- [cig-commits] r19725 - in seismo/3D/SPECFEM3D_GLOBE/branches/SPECFEM3D_GLOBE_SUNFLOWER/src: cuda specfem3D
danielpeter at geodynamics.org
- [cig-commits] r19726 - in short/3D/PyLith/trunk/unittests/libtests/meshio: . data
knepley at geodynamics.org
- [cig-commits] r19727 - seismo/2D/SPECFEM2D/trunk/src/shared
dkomati1 at geodynamics.org
- [cig-commits] commit: Compute dRx_dzx and dRy_dzy correctly near the boundary
Mercurial
- [cig-commits] r19728 - short/3D/PyLith/trunk/unittests/libtests/materials
brad at geodynamics.org
- [cig-commits] r19729 - short/3D/PyLith/pylith_installer/trunk
brad at geodynamics.org
- [cig-commits] r19730 - in cs/buildbot/pylith_deps: . src
brad at geodynamics.org
- [cig-commits] r19731 - in short/3D/PyLith/branches/pylith-scecdynrup: libsrc/pylith/materials unittests/libtests/materials unittests/libtests/materials/data unittests/libtests/meshio unittests/libtests/meshio/data
brad at geodynamics.org
- [cig-commits] r19732 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210-2d
brad at geodynamics.org
- [cig-commits] r19733 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210-2d
brad at geodynamics.org
- [cig-commits] r19734 - short/3D/PyLith/trunk/libsrc/pylith/materials
willic3 at geodynamics.org
- [cig-commits] r19735 - in short/3D/PyLith/branches/v1.6-stable: libsrc/pylith/faults libsrc/pylith/meshio libsrc/pylith/problems libsrc/pylith/topology pylith/bc pylith/faults pylith/materials pylith/meshio pylith/problems pylith/topology pylith/utils
brad at geodynamics.org
- [cig-commits] r19736 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/topology
brad at geodynamics.org
- [cig-commits] r19737 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19738 - short/3D/PyLith/branches/v1.6-stable/tests/2d/frictionslide
brad at geodynamics.org
- [cig-commits] r19739 - in short/3D/PyLith/branches/v1.6-stable/examples/3d: hex8 tet4
brad at geodynamics.org
- [cig-commits] r19740 - long/3D/SNAC/trunk/Snac/snac2vtk
echoi at geodynamics.org
- [cig-commits] r19741 - in short/3D/PyLith/branches/v1.6-stable: libsrc/pylith/problems pylith/apps pylith/utils
brad at geodynamics.org
- [cig-commits] r19742 - short/3D/PyLith/branches/v1.6-stable/examples/twocells/twotet4-geoproj
brad at geodynamics.org
- [cig-commits] r19743 - in long/3D/SNAC/trunk/Snac: libSnac/src plugins/plastic_BI plugins/remesher_BI
echoi at geodynamics.org
- [cig-commits] r19744 - in long/3D/SNAC/trunk/Snac/plugins: plastic_BI remesher_BI
echoi at geodynamics.org
- [cig-commits] r19745 - long/3D/SNAC/trunk/Snac/plugins/viscoplastic_BI
echoi at geodynamics.org
- [cig-commits] r19746 - in short/3D/PyLith/branches/v1.6-stable: . examples/twocells tests/3d/plasticity
brad at geodynamics.org
- [cig-commits] r19747 - short/3D/PyLith/branches/v1.6-stable/examples/twocells
brad at geodynamics.org
- [cig-commits] r19748 - short/3D/PyLith/branches/v1.6-stable/examples/bar_shearwave/tri3
brad at geodynamics.org
- [cig-commits] r19749 - short/3D/PyLith/branches/v1.6-stable/pylith/faults
brad at geodynamics.org
- [cig-commits] r19750 - short/3D/PyLith/branches/v1.6-stable/tests_auto/2d/quad4
brad at geodynamics.org
- [cig-commits] r19751 - in short/3D/PyLith/branches/v1.6-stable: . doc/releasenotes
brad at geodynamics.org
- [cig-commits] r19752 - short/3D/PyLith/branches/v1.6-stable
brad at geodynamics.org
- [cig-commits] r19753 - short/3D/PyLith/pylith_installer/trunk
brad at geodynamics.org
- [cig-commits] r19754 - in short/3D/PyLith/trunk: examples/3d/hex8 libsrc/pylith/materials libsrc/pylith/meshio modulesrc/meshio pylith/meshio
brad at geodynamics.org
- [cig-commits] r19755 - short/3D/PyLith/trunk/examples/3d/hex8
brad at geodynamics.org
- [cig-commits] r19756 - in short/3D/PyLith/trunk/unittests/pytests/meshio: . data
brad at geodynamics.org
- [cig-commits] r19757 - short/3D/PyLith/trunk/pylith/meshio
brad at geodynamics.org
- [cig-commits] r19758 - short/3D/PyLith/pylith_installer/trunk
brad at geodynamics.org
- [cig-commits] r19759 - short/3D/PyLith/pylith_installer/trunk
brad at geodynamics.org
- [cig-commits] r19760 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19761 - short/3D/PyLith/tags
brad at geodynamics.org
- [cig-commits] commit: Initial import from old ArX repo
Mercurial
- [cig-commits] commit: Add a missing include
Mercurial
- [cig-commits] commit: Change g++-3.2 to g++ in the makefiles
Mercurial
- [cig-commits] commit: Make it throw an exception rather than abort
Mercurial
- [cig-commits] commit: move to .hpp and .cpp
Mercurial
- [cig-commits] commit: Fix some includes
Mercurial
- [cig-commits] commit: Add makefiles for MS Visual C++ and Intel Windows C++
Mercurial
- [cig-commits] commit: Increase the number of iterations in the speed test by a factor of 10 so that they are not too quick on modern machines
Mercurial
- [cig-commits] commit: Add a skeletal Tensor2_antisymmetric
Mercurial
- [cig-commits] commit: First efforts to generalize the interface code. Uses FTensor
Mercurial
- [cig-commits] r19762 - short/3D/PyLith/trunk
brad at geodynamics.org
- [cig-commits] r19763 - cs/buildbot/pylith_deps
brad at geodynamics.org
- [cig-commits] commit: Add T3ch(i,N0,N1) and tests
Mercurial
- [cig-commits] commit: Use local FTensor
Mercurial
- [cig-commits] commit: Convert all of the jump calculation in compute_Cx to FTensor
Mercurial
- [cig-commits] commit: Convert the jump calculations for dp/dx and ddzy/dxdy for Cx to FTensor
Mercurial
- [cig-commits] commit: Change dCx to use FTensor
Mercurial
- [cig-commits] commit: Make compute_Cp use FTensor
Mercurial
- [cig-commits] commit: Add include guards to FTensor.hpp
Mercurial
- [cig-commits] commit: Move computation of v_dv, dv_dv, and ddv_dv out of compute_Cx into compute_v_on_interface
Mercurial
- [cig-commits] commit: Change default size to 64
Mercurial
- [cig-commits] commit: Move compute_Cx to compute_Cxyz
Mercurial
- [cig-commits] r19764 - seismo/3D/SPECFEM3D/trunk/src/specfem3D
danielpeter at geodynamics.org
- [cig-commits] r19765 - seismo/2D/SPECFEM2D/trunk/doc/USER_MANUAL
dkomati1 at geodynamics.org
- [cig-commits] r19766 - in long/3D/SNAC/trunk/Snac: . plugins
echoi at geodynamics.org
- [cig-commits] r19767 - long/3D/SNAC/trunk/Snac/plugins/viscoplastic_BI
echoi at geodynamics.org
- [cig-commits] r19768 - short/3D/PyLith/pylith_installer/trunk
brad at geodynamics.org
- [cig-commits] commit: Add an Interface class and make compute_Cxyz more able to compute Cy as well as Cx
Mercurial
- [cig-commits] commit: Compute Cy using compute_Cxyz
Mercurial
- [cig-commits] commit: Add a Makefile for convenience
Mercurial
- [cig-commits] commit: compute_Cp uses FTensor
Mercurial
- [cig-commits] commit: Remove non-FTensor version of compute_v_on_interface
Mercurial
- [cig-commits] commit: Cleanup
Mercurial
- [cig-commits] commit: Add a level set function, but do not use it yet. Also make the initial guess really zero
Mercurial
- [cig-commits] commit: Write distx and disty in their vtk files, not zx and zy
Mercurial
- [cig-commits] commit: make compute_Cp only uses distance functions
Mercurial
- [cig-commits] commit: Make Interface only use distance functions
Mercurial
- [cig-commits] r19769 - cs/pythia/trunk
brad at geodynamics.org
- [cig-commits] r19770 - cs/buildbot/pylith_deps/src
brad at geodynamics.org
- [cig-commits] r19771 - cs/buildbot/pylith_deps/src
brad at geodynamics.org
- [cig-commits] r19772 - in short/3D/PyLith/trunk: libsrc/pylith/materials modulesrc/materials pylith/materials unittests/libtests/materials
willic3 at geodynamics.org
- [cig-commits] r19773 - seismo/2D/SPECFEM2D/trunk/setup
dkomati1 at geodynamics.org
- [cig-commits] r19774 - seismo/2D/SPECFEM2D/trunk/src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19775 - in short/3D/PyLith/trunk: libsrc/pylith/materials modulesrc/materials unittests/libtests/materials unittests/pytests/materials
willic3 at geodynamics.org
- [cig-commits] r19776 - in seismo/3D/SPECFEM3D_GLOBE/trunk: doc/USER_MANUAL src/specfem3D
dkomati1 at geodynamics.org
- [cig-commits] r19777 - in short/3D/PyLith/trunk: . doc/releasenotes examples/3d/hex8 examples/3d/tet4 examples/twocells examples/twocells/twotet4-geoproj libsrc/pylith/faults libsrc/pylith/meshio libsrc/pylith/problems libsrc/pylith/topology pylith/apps pylith/bc pylith/faults pylith/materials pylith/meshio pylith/problems pylith/topology pylith/utils share tests/2d/frictionslide tests/3d/plasticity tests_auto/2d/quad4
brad at geodynamics.org
- [cig-commits] r19778 - short/3D/PyLith/trunk/tests/3d/plasticity
brad at geodynamics.org
- [cig-commits] r19779 - in short/3D/PyLith/branches/pylith-scecdynrup: . doc/releasenotes examples/3d/hex8 examples/3d/tet4 examples/twocells examples/twocells/twotet4-geoproj libsrc/pylith/faults libsrc/pylith/materials libsrc/pylith/meshio libsrc/pylith/problems libsrc/pylith/topology modulesrc/materials modulesrc/meshio pylith/apps pylith/bc pylith/faults pylith/materials pylith/meshio pylith/problems pylith/topology pylith/utils share tests/2d/frictionslide tests/3d/plasticity tests_auto/2d/quad4 unittests/libtests/materials unittests/pytests/materials unittests/pytests/meshio unittests/pytests/meshio/data
brad at geodynamics.org
- [cig-commits] commit: add stress output for observation plane, add anatolia colour scale, update documentation, add the Chi-Chi postseismic relaxation preferred model
Mercurial
- [cig-commits] r19780 - short/3D/PyLith/trunk/pylith/materials
brad at geodynamics.org
- [cig-commits] r19781 - short/3D/PyLith/branches/pylith-scecdynrup/pylith/materials
brad at geodynamics.org
- [cig-commits] r19782 - seismo/3D/SPECFEM3D_GLOBE/trunk/src/specfem3D
dkomati1 at geodynamics.org
- [cig-commits] commit: Compute d/dtt using a general method
Mercurial
- [cig-commits] commit: Compute all components of d/dtt using a general method
Mercurial
- [cig-commits] r19783 - seismo/3D/SPECFEM3D/trunk/doc/USER_MANUAL
dkomati1 at geodynamics.org
- [cig-commits] r19784 - in seismo/3D/SPECFEM3D_GLOBE/branches/SPECFEM3D_GLOBE_SUNFLOWER: DATA EXAMPLES/global_PREM_kernels/amplitude/DATA EXAMPLES/global_PREM_kernels/traveltime/DATA EXAMPLES/global_s362ani/DATA EXAMPLES/global_s362ani_small/DATA EXAMPLES/noise_examples/global_long EXAMPLES/noise_examples/global_short EXAMPLES/noise_examples/regional EXAMPLES/noise_examples/test_global EXAMPLES/noise_examples/test_regional EXAMPLES/regional_Greece_small/DATA EXAMPLES/regional_MiddleEast/DATA src/auxiliaries src/create_header_file src/cuda src/meshfem3D src/shared src/specfem3D
danielpeter at geodynamics.org
- [cig-commits] r19785 - cs/buildbot/trunk/buildbot/scripts
brad at geodynamics.org
- [cig-commits] r19786 - cs/buildbot/trunk/buildbot/scripts
brad at geodynamics.org
- [cig-commits] r19787 - in short/3D/PyLith/trunk: examples/3d/hex8 libsrc/pylith/problems
knepley at geodynamics.org
- [cig-commits] commit: Fix a warning
Mercurial
- [cig-commits] commit: Fix a warning
Mercurial
- [cig-commits] commit: Fix warnings
Mercurial
- [cig-commits] commit: Fix for Petsc 3.2
Mercurial
- [cig-commits] commit: Fix compiler warnings.
Mercurial
- [cig-commits] commit: Update to Petsc 3.2.
Mercurial
- [cig-commits] commit: Fix compile warnings
Mercurial
- [cig-commits] commit: Update to Petsc 3.2
Mercurial
- [cig-commits] commit: Handle the case where PACKAGES_LIBS is not defined by Petsc
Mercurial
- [cig-commits] r19788 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/friction
brad at geodynamics.org
- [cig-commits] r19789 - short/3D/PyLith/branches/v1.6-stable/examples/3d/hex8
brad at geodynamics.org
- [cig-commits] r19790 - in short/3D/PyLith/trunk: examples/3d/hex8 libsrc/pylith/friction
brad at geodynamics.org
- [cig-commits] r19791 - in short/3D/PyLith/branches/pylith-scecdynrup: . examples/3d/hex8 libsrc/pylith/friction libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19792 - in short/3D/PyLith/branches/v1.6-stable/applications: . utilities
brad at geodynamics.org
- [cig-commits] r19793 - in short/3D/PyLith/trunk/applications: . utilities
brad at geodynamics.org
- [cig-commits] commit: Make JournalFirewall abort, not assert
Mercurial
- [cig-commits] commit: Add a tolerance when checking whether a point is inside the mesh. Otherwise, with Q2 elements, the curvature can make it seem that points are outside the boundary when they are actually inside.
Mercurial
- [cig-commits] commit: Remove T-mesh stuff from EulerDeform
Mercurial
- [cig-commits] commit: Remove T-mesh from the defaults
Mercurial
- [cig-commits] commit: Remove T-mesh from the input files
Mercurial
- [cig-commits] commit: Make the code error out when interpolating into unsynced space
Mercurial
- [cig-commits] r19794 - short/3D/PyLith/trunk/libsrc/pylith/problems
knepley at geodynamics.org
- [cig-commits] r19795 - short/3D/PyLith/branches/v1.6-stable/applications/utilities
brad at geodynamics.org
- [cig-commits] r19796 - in short/3D/PyLith/trunk/libsrc/pylith: problems utils
brad at geodynamics.org
- [cig-commits] r19797 - in short/3D/PyLith/branches/v1.6-stable/libsrc/pylith: problems utils
brad at geodynamics.org
- [cig-commits] r19798 - seismo/3D/SPECFEM3D_GLOBE/trunk/src/specfem3D
dkomati1 at geodynamics.org
- [cig-commits] r19799 - seismo/3D/CPML/trunk
dkomati1 at geodynamics.org
- [cig-commits] r19800 - seismo/3D/CPML/trunk
dkomati1 at geodynamics.org
- [cig-commits] r19801 - seismo/2D/SPECFEM2D/trunk/src/meshfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19802 - seismo/2D/SPECFEM2D/trunk/src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19803 - in seismo/2D/SPECFEM2D/trunk: DATA EXAMPLES EXAMPLES/Abel_Brest EXAMPLES/Gmsh_example_MPI EXAMPLES/Gmsh_example_serial EXAMPLES/INDUSTRIAL_FORMAT EXAMPLES/M2_UPPA EXAMPLES/Rayleigh_wave_no_crack EXAMPLES/Tape2007 EXAMPLES/Tape2007_kernel EXAMPLES/Tromp2005 EXAMPLES/Tromp2005_kernel EXAMPLES/acoustic_poroelastic EXAMPLES/attenuation EXAMPLES/canyon EXAMPLES/fluid_solid/fluid_solid_external_mesh EXAMPLES/fluid_solid/from_2000_Geophysics_paper_flat_ocean_bottom EXAMPLES/fluid_solid/from_2000_Geophysics_paper_sinusoidal_ocean_bottom EXAMPLES/init_plane EXAMPLES/noise_layered/model_0 EXAMPLES/noise_layered/model_1 EXAMPLES/noise_layered/model_2 EXAMPLES/noise_uniform EXAMPLES/semi_infinite_homo UTILS setup
dkomati1 at geodynamics.org
- [cig-commits] r19804 - in seismo/2D/SPECFEM2D/trunk: DATA EXAMPLES EXAMPLES/Abel_Brest EXAMPLES/Gmsh_example_MPI EXAMPLES/Gmsh_example_serial EXAMPLES/INDUSTRIAL_FORMAT EXAMPLES/M2_UPPA EXAMPLES/Rayleigh_wave_no_crack EXAMPLES/Rayleigh_wave_with_crack EXAMPLES/Tape2007 EXAMPLES/Tape2007_kernel EXAMPLES/Tromp2005 EXAMPLES/Tromp2005_kernel EXAMPLES/acoustic_poroelastic EXAMPLES/attenuation EXAMPLES/canyon EXAMPLES/fluid_solid/fluid_solid_external_mesh EXAMPLES/fluid_solid/from_2000_Geophysics_paper_flat_ocean_bottom EXAMPLES/fluid_solid/from_2000_Geophysics_paper_sinusoidal_ocean_bottom EXAMPLES/init_plane EXAMPLES/noise_layered/model_0 EXAMPLES/noise_layered/model_1 EXAMPLES/noise_layered/model_2 EXAMPLES/noise_uniform EXAMPLES/semi_infinite_homo src/meshfem2D src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19805 - in seismo/2D/SPECFEM2D/trunk: . setup src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19806 - seismo/2D/SPECFEM2D/trunk/src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19807 - seismo/2D/SPECFEM2D/trunk/src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19808 - seismo/2D/SPECFEM2D/trunk/src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19809 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19810 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19811 - in short/3D/PyLith/branches/v1.6-stable: examples/3d/hex8 libsrc/pylith/utils
brad at geodynamics.org
- [cig-commits] r19812 - in short/3D/PyLith/trunk: applications/utilities examples/3d/hex8 libsrc/pylith/problems libsrc/pylith/utils
brad at geodynamics.org
- [cig-commits] r19813 - in short/3D/PyLith/branches/pylith-scecdynrup: applications applications/utilities examples/3d/hex8 libsrc/pylith/problems libsrc/pylith/utils
brad at geodynamics.org
- [cig-commits] r19814 - short/3D/PyLith/branches/v1.6-stable/examples/3d/hex8
brad at geodynamics.org
- [cig-commits] r19815 - short/3D/PyLith/trunk/examples/3d/hex8
brad at geodynamics.org
- [cig-commits] r19816 - short/3D/PyLith/trunk/examples/3d/hex8
brad at geodynamics.org
- [cig-commits] r19817 - short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8
brad at geodynamics.org
- [cig-commits] r19818 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19819 - short/3D/PyLith/trunk
brad at geodynamics.org
- [cig-commits] r19820 - in seismo/2D/SPECFEM2D/trunk: UTILS/Gmsh src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19821 - in short/3D/PyLith/trunk: examples/3d/hex8 libsrc/pylith/meshio modulesrc/meshio pylith/meshio
brad at geodynamics.org
- [cig-commits] r19822 - in short/3D/PyLith/trunk: examples/3d/hex8 unittests/libtests/meshio
brad at geodynamics.org
- [cig-commits] r19823 - short/3D/PyLith/trunk/pylith/problems
brad at geodynamics.org
- [cig-commits] r19824 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/feassemble
brad at geodynamics.org
- [cig-commits] r19825 - short/3D/PyLith/trunk/libsrc/pylith/feassemble
brad at geodynamics.org
- [cig-commits] r19826 - short/3D/PyLith/trunk
brad at geodynamics.org
- [cig-commits] r19827 - short/3D/PyLith/trunk
brad at geodynamics.org
- [cig-commits] r19828 - in short/3D/PyLith/branches/pylith-scecdynrup: . examples/3d/hex8 libsrc/pylith/feassemble libsrc/pylith/meshio modulesrc/meshio pylith/meshio pylith/problems unittests/libtests/meshio
brad at geodynamics.org
- [cig-commits] commit: Split Valid, compute_2nd_derivs, and vel into separate files.
Mercurial
- [cig-commits] commit: Fix an x->y typo
Mercurial
- [cig-commits] commit: Get rid of -D_GLIBCXX_DEBUG since you really have to compile
Mercurial
- [cig-commits] commit: Compute dvy_dtt using general method. This also fixes a bug where the
Mercurial
- [cig-commits] commit: Remove compute_dv_yy since is it not used anymore.
Mercurial
- [cig-commits] commit: Add some support for computing the first derivative. Also fix a minor
Mercurial
- [cig-commits] r19829 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19830 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] commit: Added some support for computing 1st derivatives in a general manner.
Mercurial
- [cig-commits] commit: Compute dv_dt using general method.
Mercurial
- [cig-commits] r19831 - short/3D/PyLith/trunk/libsrc/pylith/meshio
brad at geodynamics.org
- [cig-commits] r19832 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19833 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19834 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19835 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19836 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19837 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19838 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19839 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19840 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19841 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19842 - short/3D/PyLith/trunk/libsrc/pylith/meshio
brad at geodynamics.org
- [cig-commits] commit: Set up some infrastructure for computing v in a general manner. Also
Mercurial
- [cig-commits] commit: Compute v in a general manner.
Mercurial
- [cig-commits] r19843 - in seismo/3D/SPECFEM3D_GLOBE/trunk: doc/USER_MANUAL src/meshfem3D utils/Visualization/Paraview
danielpeter at geodynamics.org
- [cig-commits] r19844 - in seismo/3D/ADJOINT_TOMO/iterate_adj: UTILS cluster cluster/model_slice cluster/model_vp_vs cluster/model_vp_vs/src cluster/scripts cluster/smooth cluster/smooth_update cluster/sum_kernel cluster/sum_kernel/src matlab
danielpeter at geodynamics.org
- [cig-commits] r19845 - in short/3D/PyLith/trunk/libsrc/pylith: meshio topology
knepley at geodynamics.org
- [cig-commits] r19846 - in seismo/3D/ADJOINT_TOMO/iterate_adj/cluster: model_vp_vs model_vp_vs/src smooth/src sum_kernel/src
danielpeter at geodynamics.org
- [cig-commits] r19847 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19848 - short/3D/PyLith/trunk/libsrc/pylith/meshio
brad at geodynamics.org
- [cig-commits] r19849 - short/3D/PyLith/trunk/examples/3d/hex8
brad at geodynamics.org
- [cig-commits] commit: No longer pass a Model to compute_Cp and compute_Cxyz since it is not needed.
Mercurial
- [cig-commits] commit: Add include guard to constants.hxx
Mercurial
- [cig-commits] commit: Compute dC_dv ahead of time instead of getting it from compute_Cxyz.
Mercurial
- [cig-commits] commit: Remove all of the logic for computing dC_dv within compute_v_on_interface.
Mercurial
- [cig-commits] r19850 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19851 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19852 - short/3D/PyLith/branches
brad at geodynamics.org
- [cig-commits] r19853 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] commit: Make a new copy of zx and zy in dC_dv and set that to zero. Then it
Mercurial
- [cig-commits] commit: Add a TODO and remove outdated comments.
Mercurial
- [cig-commits] commit: Split out the Interface constructor into a separate file. Interface
Mercurial
- [cig-commits] r19854 - in short/3D/PyLith/branches/v1.7-trunk: libsrc/pylith/bc libsrc/pylith/feassemble libsrc/pylith/materials modulesrc/feassemble modulesrc/materials pylith/feassemble pylith/problems unittests/libtests/bc unittests/libtests/faults unittests/libtests/feassemble unittests/libtests/materials unittests/pytests/bc unittests/pytests/faults unittests/pytests/feassemble unittests/pytests/materials
brad at geodynamics.org
- [cig-commits] r19855 - short/3D/PyLith/benchmarks/trunk/dynamic/scecdynrup/tpv210
brad at geodynamics.org
- [cig-commits] r19856 - short/3D/PyLith/branches/v1.7-trunk
brad at geodynamics.org
- [cig-commits] r19857 - short/3D/PyLith/branches/v1.7-trunk/pylith/problems
brad at geodynamics.org
- [cig-commits] r19858 - short/3D/PyLith/branches/v1.7-trunk
brad at geodynamics.org
- [cig-commits] commit: Remove (i, j) from the call to compute_v_on_interface since it is not
Mercurial
- [cig-commits] r19859 - in cs/spatialdata/trunk: . libsrc/geocoords
brad at geodynamics.org
- [cig-commits] r19860 - seismo/2D/SPECFEM2D/trunk/src/specfem2D
dkomati1 at geodynamics.org
- [cig-commits] r19861 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19862 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19863 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19864 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] commit: Add support for anticorners. Change "intersect_xy" to
Mercurial
- [cig-commits] commit: switch jump computation out to compute_jumps
Mercurial
- [cig-commits] r19865 - short/3D/PyLith/branches/v1.7-trunk/libsrc/pylith/problems
willic3 at geodynamics.org
- [cig-commits] commit: Fix two memory leaks
Mercurial
- [cig-commits] commit: Initialize the residual everywhere including the boundary, where it is
Mercurial
- [cig-commits] commit: Rearrange and cleanup
Mercurial
- [cig-commits] r19866 - seismo/3D/ADJOINT_TOMO/iterate_adj/cluster/sum_kernel/src
danielpeter at geodynamics.org
- [cig-commits] r19867 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
ampuero at geodynamics.org
- [cig-commits] r19868 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19869 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19870 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19871 - in seismo/3D/SPECFEM3D/branches/SPECFEM3D_SUNFLOWER/src: cuda meshfem3D shared specfem3D
danielpeter at geodynamics.org
- [cig-commits] r19872 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19873 - short/3D/PyLith/trunk/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19874 - short/3D/PyLith/branches/v1.7-trunk
brad at geodynamics.org
- [cig-commits] r19875 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
ampuero at geodynamics.org
- [cig-commits] r19876 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19877 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19878 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19879 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] commit: Switched to JGR document class. More work on text for Numerical Model of Fault Slip section.
Mercurial
- [cig-commits] r19880 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/src
surendra at geodynamics.org
- [cig-commits] r19881 - in seismo/3D/SPECFEM3D_GLOBE/trunk: setup src/create_header_file src/meshfem3D src/shared src/specfem3D
dkomati1 at geodynamics.org
- [cig-commits] r19882 - seismo/3D/SPECFEM3D_GLOBE/trunk/doc/USER_MANUAL
dkomati1 at geodynamics.org
- [cig-commits] r19883 - in seismo/3D/SPECFEM3D_GLOBE/trunk/src: create_header_file shared
dkomati1 at geodynamics.org
- [cig-commits] commit: More work on solver stuff. Added outline for benchmarks.
Mercurial
- [cig-commits] commit: Added discussion of friction line search.
Mercurial
- [cig-commits] commit: Updated figures/tables to JGR format (still need more work).
Mercurial
- [cig-commits] r19884 - seismo/3D/FAULT_SOURCE/branches/new_fault_db/decompose_mesh_SCOTCH
ampuero at geodynamics.org
- [cig-commits] r19885 - in seismo/3D/SPECFEM3D_GLOBE/trunk/src: create_header_file meshfem3D shared
dkomati1 at geodynamics.org
- [cig-commits] r19886 - seismo/3D/SPECFEM3D_GLOBE/trunk/src/meshfem3D
dkomati1 at geodynamics.org
- [cig-commits] r19887 - seismo/3D/SPECFEM3D_GLOBE/trunk/src/meshfem3D
dkomati1 at geodynamics.org
- [cig-commits] r19888 - in seismo/3D/FAULT_SOURCE: . branches/new_fault_db/src
ampuero at geodynamics.org
- [cig-commits] r19889 - seismo/3D/SPECFEM3D_GLOBE/trunk/src/specfem3D
dkomati1 at geodynamics.org
- [cig-commits] commit: Started work on cohesive cell figure.
Mercurial
- [cig-commits] commit: Fixed typo.
Mercurial
- [cig-commits] commit: More work on cohesive cell figure.
Mercurial
- [cig-commits] commit: More work on cohesive cell figure.
Mercurial
- [cig-commits] commit: Implement corner fix. Untested.
Mercurial
- [cig-commits] commit: Add a rotation to the initial condition.
Mercurial
- [cig-commits] commit: Fix rotations of initial data.
Mercurial
- [cig-commits] commit: Make it easier to only run one iteration and check vs analytic solution.
Mercurial
- [cig-commits] commit: Compute eta_jump locally in the analytic check in vel.hxx
Mercurial
- [cig-commits] commit: Fix Cp. This involved getting rid of the eta_jump global, fixing
Mercurial
- [cig-commits] commit: Use a t=Number<1> rather than "1" to clarify that we are using the
Mercurial
- [cig-commits] commit: Convert jumps from (norm, tangent) into xyz coordinates.
Mercurial
- [cig-commits] commit: Fix sign error in compute_Cp
Mercurial
- [cig-commits] commit: Fix a bug where we were using the wrong dp_jump in an intermediate calculation.
Mercurial
- [cig-commits] commit: Fix rotation of components in initial
Mercurial
- [cig-commits] commit: Handle the case where the interface sits exactly on the boundary
Mercurial
- [cig-commits] commit: Finished cohesive cell figure. Added nondiemsionalization paragraph to manuscript.
Mercurial
- [cig-commits] commit: Fixed typo in shell script.
Mercurial
- [cig-commits] commit: Fix a scaling error in compute_dv_dtt that only shows up for inclined interfaces.
Mercurial
- [cig-commits] commit: Added missing figure.
Mercurial
- [cig-commits] commit: Merge.
Mercurial
- [cig-commits] r19890 - short/3D/PyLith/branches/pylith-scecdynrup/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19891 - in short/3D/PyLith/branches/pylith-scecdynrup: examples/3d/hex8 libsrc/pylith/meshio libsrc/pylith/topology
brad at geodynamics.org
- [cig-commits] r19892 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19893 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19894 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19895 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19896 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19897 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19898 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19899 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19900 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19901 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19902 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19903 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] commit: Add FTENSOR_DEBUG to debug compile flags
Mercurial
- [cig-commits] commit: Pass center_dist as a double, not an int. Fix the sign of the comparison for corners.
Mercurial
- [cig-commits] commit: Correctly switch the direction for the velocity of the corner correction.
Mercurial
- [cig-commits] r19904 - in short/3D/PyLith/benchmarks/trunk: . figures figures/matplotlibext
brad at geodynamics.org
- [cig-commits] r19905 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] commit: Compute all of dR_dz in a separate function.
Mercurial
- [cig-commits] commit: Compute dRc_dp correctly. Does not seem to make much difference.
Mercurial
- [cig-commits] commit: Add in profiling options
Mercurial
- [cig-commits] commit: Use a priority queue instead of sorting everything all the time.
Mercurial
- [cig-commits] commit: Compute the coefficients of the matrix beforehand. Speeds up by an
Mercurial
- [cig-commits] r19906 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19907 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19908 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19909 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] r19910 - short/3D/PyLith/benchmarks/trunk/static/performance/solvertest
brad at geodynamics.org
- [cig-commits] commit: Get rid of compute_dR_dv since we can get the values from compute_coefficients.
Mercurial
- [cig-commits] commit: Do not include compute_Cxyz.hxx since it is not used.
Mercurial
- [cig-commits] commit: Reorganize most things into compute_coefficients.
Mercurial
- [cig-commits] commit: Change back from priority queue to just sorting the vectors. The
Mercurial
- [cig-commits] commit: Increase the search area by 1 to get all of the possible contributions to the stencil.
Mercurial
- [cig-commits] r19911 - short/3D/PyLith/branches/v1.6-stable/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19912 - short/3D/PyLith/trunk/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19913 - short/3D/PyLith/branches/v1.7-trunk/libsrc/pylith/problems
brad at geodynamics.org
- [cig-commits] r19914 - short/3D/PyLith/branches/pylith-scecdynrup/libsrc/pylith/problems
brad at geodynamics.org
Last message date:
Fri Mar 30 15:50:26 PDT 2012
Archived on: Fri Mar 30 15:50:27 PDT 2012
This archive was generated by
Pipermail 0.09 (Mailman edition).