[cig-commits] r20067 - short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4
brad at geodynamics.org
brad at geodynamics.org
Thu May 10 13:01:16 PDT 2012
Author: brad
Date: 2012-05-10 13:01:15 -0700 (Thu, 10 May 2012)
New Revision: 20067
Modified:
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionCompression.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionOpening.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearSliding.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearStick.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningCompression.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningOpening.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearSliding.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearStick.py
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_compression.cfg
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_opening.cfg
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_sliding.cfg
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_stick.cfg
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_compression.cfg
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_opening.cfg
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_sliding.cfg
short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_stick.cfg
Log:
Updated for traction perturbation.
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionCompression.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionCompression.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionCompression.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","friction_coefficient","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","friction_coefficient","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -148,7 +148,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionOpening.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionOpening.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionOpening.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","friction_coefficient","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","friction_coefficient","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -149,7 +149,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearSliding.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearSliding.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearSliding.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","friction_coefficient","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","friction_coefficient","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -157,7 +157,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearStick.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearStick.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestFrictionShearStick.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","friction_coefficient","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","friction_coefficient","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -148,7 +148,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningCompression.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningCompression.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningCompression.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -150,7 +150,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningOpening.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningOpening.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningOpening.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -151,7 +151,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearSliding.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearSliding.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearSliding.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -160,7 +160,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearStick.py
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearStick.py 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/TestSlipWeakeningShearStick.py 2012-05-10 20:01:15 UTC (rev 20067)
@@ -83,7 +83,7 @@
return
filename = "%s-fault_info.vtk" % self.outputRoot
- fields = ["strike_dir", "normal_dir", "initial_traction","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
+ fields = ["strike_dir", "normal_dir", "traction_initial","static_coefficient","dynamic_coefficient","slip_weakening_parameter","cohesion"]
check_vertex_fields(self, filename, self.faultMesh, fields)
return
@@ -150,7 +150,7 @@
field[:,0] = normalDir[0]
field[:,1] = normalDir[1]
- elif name == "initial_traction":
+ elif name == "traction_initial":
field = numpy.zeros( (nvertices, 3), dtype=numpy.float64)
field[:,0] = initialTraction[0]
field[:,1] = initialTraction[1]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_compression.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_compression.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_compression.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -103,18 +103,20 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = Initial fault tractions
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -1.0*MPa]
-
friction.label = Static friction
friction.db_properties = spatialdata.spatialdb.UniformDB
friction.db_properties.label = Static friction
friction.db_properties.values = [friction-coefficient,cohesion]
friction.db_properties.data = [0.6*m,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+[friction_compression.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = Initial fault tractions
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -1.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -161,7 +163,7 @@
# Give basename for VTK fault output.
[friction_compression.timedependent.interfaces.fault.output]
writer.filename = friction_compression-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,friction_coefficient,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,friction_coefficient,cohesion]
# Give basename for VTK output of state variables.
[friction_compression.timedependent.materials.material.output]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_opening.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_opening.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_opening.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -103,17 +103,20 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = Initial fault tractions
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -1.0*MPa]
-
friction.label = Static friction
friction.db_properties = spatialdata.spatialdb.UniformDB
friction.db_properties.label = Static friction
friction.db_properties.values = [friction-coefficient,cohesion]
friction.db_properties.data = [0.6,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+
+[friction_opening.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = Initial fault tractions
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -1.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -163,7 +166,7 @@
# Give basename for VTK fault output.
[friction_opening.timedependent.interfaces.fault.output]
writer.filename = friction_opening-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,friction_coefficient,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,friction_coefficient,cohesion]
# Give basename for VTK output of state variables.
[friction_opening.timedependent.materials.material.output]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_sliding.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_sliding.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_sliding.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -123,17 +123,20 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = Initial fault tractions
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -1.0*MPa]
-
friction.label = Static friction
friction.db_properties = spatialdata.spatialdb.UniformDB
friction.db_properties.label = Static friction
friction.db_properties.values = [friction-coefficient,cohesion]
friction.db_properties.data = [0.6,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+
+[friction_shear_sliding.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = Initial fault tractions
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -1.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -180,7 +183,7 @@
# Give basename for VTK fault output.
[friction_shear_sliding.timedependent.interfaces.fault.output]
writer.filename = friction_shear_sliding-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,friction_coefficient,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,friction_coefficient,cohesion]
# Give basename for VTK output of state variables.
[friction_shear_sliding.timedependent.materials.material.output]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_stick.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_stick.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/friction_shear_stick.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -130,17 +130,20 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = Initial fault tractions
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -10.0*MPa]
-
friction.label = Static friction
friction.db_properties = spatialdata.spatialdb.UniformDB
friction.db_properties.label = Static friction
friction.db_properties.values = [friction-coefficient,cohesion]
friction.db_properties.data = [0.6,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+
+[friction_shear_stick.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = Initial fault tractions
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -10.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -186,7 +189,7 @@
# Give basename for VTK fault output.
[friction_shear_stick.timedependent.interfaces.fault.output]
writer.filename = friction_shear_stick-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,friction_coefficient,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,friction_coefficient,cohesion]
# Give basename for VTK output of state variables.
[friction_shear_stick.timedependent.materials.material.output]
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_compression.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_compression.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_compression.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -101,11 +101,6 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = Initial fault tractions
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -1.0*MPa]
-
friction = pylith.friction.SlipWeakening
friction.label = Slip-weakening friction
@@ -114,6 +109,14 @@
friction.db_properties.values = [static-coefficient,dynamic-coefficient,slip-weakening-parameter,cohesion]
friction.db_properties.data = [0.6,0.59,0.2*m,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+
+[slipweakening_compression.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = Initial fault tractions
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -1.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -160,7 +163,7 @@
# Give basename for VTK fault output.
[slipweakening_compression.timedependent.interfaces.fault.output]
writer.filename = slipweakening_compression-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
vertex_data_fields = [slip,traction,cumulative_slip,previous_slip]
# Give basename for VTK output of state variables.
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_opening.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_opening.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_opening.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -100,11 +100,6 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = "Initial fault tractions"
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -1.0*MPa]
-
friction = pylith.friction.SlipWeakening
friction.label = Slip-weakening friction
@@ -113,6 +108,14 @@
friction.db_properties.values = [static-coefficient,dynamic-coefficient,slip-weakening-parameter,cohesion]
friction.db_properties.data = [0.6,0.59,0.2*m,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+
+[slipweakening_opening.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = Initial fault tractions
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -1.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -152,7 +155,7 @@
# Give basename for VTK fault output.
[slipweakening_opening.timedependent.interfaces.fault.output]
writer.filename = slipweakening_opening-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
vertex_data_fields = [slip,traction,cumulative_slip,previous_slip]
# Give basename for VTK output of state variables.
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_sliding.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_sliding.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_sliding.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -125,11 +125,6 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = "Initial fault tractions"
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -1.0*MPa]
-
friction = pylith.friction.SlipWeakening
friction.label = Slip-weakening friction
@@ -138,6 +133,14 @@
friction.db_properties.values = [static-coefficient,dynamic-coefficient,slip-weakening-parameter,cohesion]
friction.db_properties.data = [0.61,0.6,0.2*m,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+
+[slipweakening_shear_sliding.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = "Initial fault tractions"
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -1.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -173,7 +176,7 @@
# Give basename for VTK fault output.
[slipweakening_shear_sliding.timedependent.interfaces.fault.output]
writer.filename = slipweakening_shear_sliding-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
vertex_data_fields = [slip,traction,cumulative_slip,previous_slip]
# Give basename for VTK output of state variables.
Modified: short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_stick.cfg
===================================================================
--- short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_stick.cfg 2012-05-10 19:49:30 UTC (rev 20066)
+++ short/3D/PyLith/branches/v1.7-trunk/tests_auto/2d/quad4/slipweakening_shear_stick.cfg 2012-05-10 20:01:15 UTC (rev 20067)
@@ -129,11 +129,6 @@
quadrature.cell = pylith.feassemble.FIATLagrange
quadrature.cell.dimension = 1
-db_initial_tractions = spatialdata.spatialdb.UniformDB
-db_initial_tractions.label = "Initial fault tractions"
-db_initial_tractions.values = [traction-shear,traction-normal]
-db_initial_tractions.data = [0.0*Pa, -10.0*MPa]
-
friction = pylith.friction.SlipWeakening
friction.label = Slip weakening friction
@@ -142,6 +137,14 @@
friction.db_properties.values = [static-coefficient,dynamic-coefficient,slip-weakening-parameter,cohesion]
friction.db_properties.data = [0.6,0.59,0.2*m,0.0*Pa]
+traction_perturbation = pylith.faults.TractPerturbation
+
+[slipweakening_shear_stick.timedependent.interfaces.fault.traction_perturbation]
+db_initial = spatialdata.spatialdb.UniformDB
+db_initial.label = Initial fault tractions
+db_initial.values = [traction-shear,traction-normal]
+db_initial.data = [0.0*Pa, -10.0*MPa]
+
# ----------------------------------------------------------------------
# PETSc
# ----------------------------------------------------------------------
@@ -188,7 +191,7 @@
# Give basename for VTK fault output.
[slipweakening_shear_stick.timedependent.interfaces.fault.output]
writer.filename = slipweakening_shear_stick-fault.vtk
-vertex_info_fields = [strike_dir,normal_dir,initial_traction,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
+vertex_info_fields = [strike_dir,normal_dir,traction_initial_value,static_coefficient,dynamic_coefficient,slip_weakening_parameter,cohesion]
vertex_data_fields = [slip,traction,cumulative_slip,previous_slip]
# Give basename for VTK output of state variables.
More information about the CIG-COMMITS
mailing list