[cig-commits] r21278 - in seismo/2D/SPECFEM2D/trunk: DATA EXAMPLES/Abel_Brest EXAMPLES/Gmsh_example_MPI EXAMPLES/Gmsh_example_serial EXAMPLES/INDUSTRIAL_FORMAT EXAMPLES/M2_UPPA EXAMPLES/Rayleigh_wave_no_crack EXAMPLES/Rayleigh_wave_with_crack EXAMPLES/Tape2007 EXAMPLES/Tape2007_kernel EXAMPLES/Tromp2005 EXAMPLES/Tromp2005_kernel EXAMPLES/acoustic_poroelastic EXAMPLES/attenuation EXAMPLES/canyon EXAMPLES/fluid_solid/fluid_solid_external_mesh EXAMPLES/fluid_solid/from_2000_Geophysics_paper_flat_ocean_bottom EXAMPLES/fluid_solid/from_2000_Geophysics_paper_sinusoidal_ocean_bottom EXAMPLES/init_plane EXAMPLES/noise_layered/model_0 EXAMPLES/noise_layered/model_1 EXAMPLES/noise_layered/model_2 EXAMPLES/noise_uniform EXAMPLES/salt_dome/Stacey_homogeneous EXAMPLES/salt_dome/Stacey_normal EXAMPLES/semi_infinite_homo src/meshfem2D src/specfem2D
dkomati1 at geodynamics.org
dkomati1 at geodynamics.org
Fri Jan 18 09:58:31 PST 2013
Author: dkomati1
Date: 2013-01-18 09:58:30 -0800 (Fri, 18 Jan 2013)
New Revision: 21278
Modified:
seismo/2D/SPECFEM2D/trunk/DATA/Par_file
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Abel_Brest/Par_file_Abel_Balanche_bathy_source_solid
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_MPI/Par_file_Gmsh_SqrCircles.in
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_serial/Par_file_Gmsh_SqrCircles.in
seismo/2D/SPECFEM2D/trunk/EXAMPLES/INDUSTRIAL_FORMAT/Par_file
seismo/2D/SPECFEM2D/trunk/EXAMPLES/M2_UPPA/Par_file_M2_UPPA
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_no_crack/Par_file_Rayleigh_2D
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_with_crack/Par_file_Rayleigh_2D
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_132rec_checker
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_onerec
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007_kernel/Par_file_Tape2007_onerec
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005_s100
seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005_kernel/Par_file_Tromp2005
seismo/2D/SPECFEM2D/trunk/EXAMPLES/acoustic_poroelastic/Par_file_acoustic_poroelastic
seismo/2D/SPECFEM2D/trunk/EXAMPLES/attenuation/Par_file_attenuation_2D
seismo/2D/SPECFEM2D/trunk/EXAMPLES/canyon/Par_file_canyon
seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/fluid_solid_external_mesh/Par_file_fluid_solid
seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_flat_ocean_bottom/Par_file_fluid_solid
seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_sinusoidal_ocean_bottom/Par_file_fluid_solid
seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave
seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_for
seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_kernel
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_fair
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_good
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_best
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_fair
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_good
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_fair
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_good
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_1
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_2
seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_3
seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_homogeneous/Par_file
seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_normal/Par_file
seismo/2D/SPECFEM2D/trunk/EXAMPLES/semi_infinite_homo/Par_file_elastic_2D
seismo/2D/SPECFEM2D/trunk/src/meshfem2D/meshfem2D.F90
seismo/2D/SPECFEM2D/trunk/src/meshfem2D/read_parameter_file.F90
seismo/2D/SPECFEM2D/trunk/src/specfem2D/setup_sources_receivers.F90
Log:
changed generate_STATIONS to use_existing_STATIONS
Modified: seismo/2D/SPECFEM2D/trunk/DATA/Par_file
===================================================================
--- seismo/2D/SPECFEM2D/trunk/DATA/Par_file 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/DATA/Par_file 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a new STATION file in ./DATA from this file or use the existing one
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Abel_Brest/Par_file_Abel_Balanche_bathy_source_solid
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Abel_Brest/Par_file_Abel_Balanche_bathy_source_solid 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Abel_Brest/Par_file_Abel_Balanche_bathy_source_solid 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 2 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_MPI/Par_file_Gmsh_SqrCircles.in
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_MPI/Par_file_Gmsh_SqrCircles.in 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_MPI/Par_file_Gmsh_SqrCircles.in 2013-01-18 17:58:30 UTC (rev 21278)
@@ -45,7 +45,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # replace anglerec with the normal to the surface (external mesh and curve file needed, anglerec above ignored)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_serial/Par_file_Gmsh_SqrCircles.in
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_serial/Par_file_Gmsh_SqrCircles.in 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Gmsh_example_serial/Par_file_Gmsh_SqrCircles.in 2013-01-18 17:58:30 UTC (rev 21278)
@@ -45,7 +45,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # replace anglerec with the normal to the surface (external mesh and curve file needed, anglerec above ignored)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/INDUSTRIAL_FORMAT/Par_file
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/INDUSTRIAL_FORMAT/Par_file 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/INDUSTRIAL_FORMAT/Par_file 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/M2_UPPA/Par_file_M2_UPPA
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/M2_UPPA/Par_file_M2_UPPA 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/M2_UPPA/Par_file_M2_UPPA 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_no_crack/Par_file_Rayleigh_2D
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_no_crack/Par_file_Rayleigh_2D 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_no_crack/Par_file_Rayleigh_2D 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_with_crack/Par_file_Rayleigh_2D
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_with_crack/Par_file_Rayleigh_2D 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Rayleigh_wave_with_crack/Par_file_Rayleigh_2D 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_132rec_checker
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_132rec_checker 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_132rec_checker 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 132 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_onerec
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_onerec 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007/Par_file_Tape2007_onerec 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007_kernel/Par_file_Tape2007_onerec
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007_kernel/Par_file_Tape2007_onerec 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tape2007_kernel/Par_file_Tape2007_onerec 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005_s100
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005_s100 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005/Par_file_Tromp2005_s100 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005_kernel/Par_file_Tromp2005
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005_kernel/Par_file_Tromp2005 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/Tromp2005_kernel/Par_file_Tromp2005 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/acoustic_poroelastic/Par_file_acoustic_poroelastic
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/acoustic_poroelastic/Par_file_acoustic_poroelastic 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/acoustic_poroelastic/Par_file_acoustic_poroelastic 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 2 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/attenuation/Par_file_attenuation_2D
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/attenuation/Par_file_attenuation_2D 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/attenuation/Par_file_attenuation_2D 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/canyon/Par_file_canyon
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/canyon/Par_file_canyon 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/canyon/Par_file_canyon 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/fluid_solid_external_mesh/Par_file_fluid_solid
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/fluid_solid_external_mesh/Par_file_fluid_solid 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/fluid_solid_external_mesh/Par_file_fluid_solid 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_flat_ocean_bottom/Par_file_fluid_solid
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_flat_ocean_bottom/Par_file_fluid_solid 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_flat_ocean_bottom/Par_file_fluid_solid 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_sinusoidal_ocean_bottom/Par_file_fluid_solid
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_sinusoidal_ocean_bottom/Par_file_fluid_solid 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/fluid_solid/from_2000_Geophysics_paper_sinusoidal_ocean_bottom/Par_file_fluid_solid 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_for
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_for 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_for 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_kernel
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_kernel 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/init_plane/Par_file_Slave_kernel 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_fair
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_fair 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_fair 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_good
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_good 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_0/Par_file_good 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_best
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_best 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_best 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_fair
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_fair 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_fair 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_good
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_good 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_1/Par_file_good 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_fair
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_fair 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_fair 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_good
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_good 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_layered/model_2/Par_file_good 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_1
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_1 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_1 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .false. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_2
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_2 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_2 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .false. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_3
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_3 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/noise_uniform/Par_file_noise_3 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .false. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_homogeneous/Par_file
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_homogeneous/Par_file 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_homogeneous/Par_file 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_normal/Par_file
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_normal/Par_file 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/salt_dome/Stacey_normal/Par_file 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/EXAMPLES/semi_infinite_homo/Par_file_elastic_2D
===================================================================
--- seismo/2D/SPECFEM2D/trunk/EXAMPLES/semi_infinite_homo/Par_file_elastic_2D 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/EXAMPLES/semi_infinite_homo/Par_file_elastic_2D 2013-01-18 17:58:30 UTC (rev 21278)
@@ -44,7 +44,7 @@
save_binary_seismograms_double = .false. # save seismograms in double precision binary format or not (can be used jointly with both flags above to save all)
SU_FORMAT = .false. # output single precision binary seismograms in Seismic Unix format (adjoint traces will be read in the same format)
subsamp_seismos = 1 # subsampling of the seismograms to create smaller files (but less accurately sampled in time)
-generate_STATIONS = .true. # creates a STATION file in ./DATA
+use_existing_STATIONS = .false. # use an existing STATION file found in ./DATA or create a new one from the receiver positions below in this Par_file
nreceiversets = 1 # number of receiver sets
anglerec = 0.d0 # angle to rotate components at receivers
rec_normal_to_surface = .false. # base anglerec normal to surface (external mesh and curve file needed)
Modified: seismo/2D/SPECFEM2D/trunk/src/meshfem2D/meshfem2D.F90
===================================================================
--- seismo/2D/SPECFEM2D/trunk/src/meshfem2D/meshfem2D.F90 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/src/meshfem2D/meshfem2D.F90 2013-01-18 17:58:30 UTC (rev 21278)
@@ -991,9 +991,8 @@
enddo
!--- compute position of the receivers and write the STATIONS file
+ if (.not. use_existing_STATIONS) then
- if (generate_STATIONS) then
-
!! DK DK for now we cannot use both enreg_surf_same_vertical and read_external_mesh
!! DK DK because we need to know splines to define the shape of the surface of the model
if(any(enreg_surf_same_vertical) .and. read_external_mesh) &
Modified: seismo/2D/SPECFEM2D/trunk/src/meshfem2D/read_parameter_file.F90
===================================================================
--- seismo/2D/SPECFEM2D/trunk/src/meshfem2D/read_parameter_file.F90 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/src/meshfem2D/read_parameter_file.F90 2013-01-18 17:58:30 UTC (rev 21278)
@@ -89,7 +89,7 @@
double precision :: f0_attenuation
integer :: seismotype
- logical :: generate_STATIONS
+ logical :: use_existing_STATIONS
integer :: nreceiversets
double precision :: anglerec
@@ -285,7 +285,7 @@
if(err_occurred() /= 0) stop 'error reading parameter 33e in Par_file'
if(subsamp_seismos < 1) stop 'error: subsamp_seismos must be >= 1'
- call read_value_logical_p(generate_STATIONS, 'solver.generate_STATIONS')
+ call read_value_logical_p(use_existing_STATIONS, 'solver.use_existing_STATIONS')
if(err_occurred() /= 0) stop 'error reading parameter 23 in Par_file'
call read_value_integer_p(nreceiversets, 'solver.nreceiversets')
Modified: seismo/2D/SPECFEM2D/trunk/src/specfem2D/setup_sources_receivers.F90
===================================================================
--- seismo/2D/SPECFEM2D/trunk/src/specfem2D/setup_sources_receivers.F90 2013-01-18 17:48:48 UTC (rev 21277)
+++ seismo/2D/SPECFEM2D/trunk/src/specfem2D/setup_sources_receivers.F90 2013-01-18 17:58:30 UTC (rev 21278)
@@ -185,7 +185,7 @@
close(14)
! write out actual station locations (compare with STATIONS from meshfem2D)
- ! NOTE: this will be written out even if generate_STATIONS = .false.
+ ! NOTE: this will be written out even if use_existing_STATIONS = .true.
open(unit=15,file='DATA/for_information_STATIONS_actually_used',status='unknown')
do irec = 1,nrec
write(15,"('S',i4.4,' AA ',f20.7,1x,f20.7,' 0.0 0.0')") &
More information about the CIG-COMMITS
mailing list