[CIG-SHORT] embedded fault plane
Rebecca Bendick
bendick at mso.umt.edu
Fri Jan 15 13:12:50 PST 2010
Hi, everyone. This may be a very rookie question; I'm just trying to
learn how to use PyLith. Are there any examples using a dislocation
on a fault plane embedded in a larger volume? I've had no trouble
reproducing results for a throughgoing fault (cutting though the whole
model volume) using the examples provided in the distribution and in
the latest manual. However, now I've used the demos from LaGRiT, in
particular variations on the example at http://meshing.lanl.gov/proj/crustal_dynamics_CFEM/insert_fault/gallery.html
to create a fully embedded dislocation, and I can't get through the
PyLith run. Here's the screen dump, but (given my newbie-ness) maybe
an already-worked example would be more helpful than debugging because
I might have made many nested mistakes.
-- meshiolagrit(info)
-- Reading finite-element mesh
>> meshio/PsetFileBinary.cc:70:<unknown>
-- psetfile(info)
-- Reading binary Pset file 'tet4_1000m_binary.pset'.
>> meshio/PsetFileBinary.cc:86:<unknown>
-- psetfile(info)
-- Reading 7 point sets from file.
>> meshio/PsetFileBinary.cc:203:<unknown>
-- psetfile(info)
-- Reading point set 'fault' with 0 points.
>> meshio/PsetFileBinary.cc:215:<unknown>
-- psetfile(info)
-- Done.
>> meshio/PsetFileBinary.cc:203:<unknown>
-- psetfile(info)
-- Reading point set 'boundary_xm' with 287 points.
>> meshio/PsetFileBinary.cc:215:<unknown>
-- psetfile(info)
-- Done.
>> meshio/PsetFileBinary.cc:203:<unknown>
-- psetfile(info)
-- Reading point set 'boundary_xp' with 287 points.
>> meshio/PsetFileBinary.cc:215:<unknown>
-- psetfile(info)
-- Done.
>> meshio/PsetFileBinary.cc:203:<unknown>
-- psetfile(info)
-- Reading point set 'boundary_ym' with 287 points.
>> meshio/PsetFileBinary.cc:215:<unknown>
-- psetfile(info)
-- Done.
>> meshio/PsetFileBinary.cc:203:<unknown>
-- psetfile(info)
-- Reading point set 'boundary_yp' with 287 points.
>> meshio/PsetFileBinary.cc:215:<unknown>
-- psetfile(info)
-- Done.
>> meshio/PsetFileBinary.cc:203:<unknown>
-- psetfile(info)
-- Reading point set 'boundary_zm' with 49 points.
>> meshio/PsetFileBinary.cc:215:<unknown>
-- psetfile(info)
-- Done.
>> meshio/PsetFileBinary.cc:203:<unknown>
-- psetfile(info)
-- Reading point set 'boundary_zp' with 49 points.
>> meshio/PsetFileBinary.cc:215:<unknown>
-- psetfile(info)
-- Done.
faults/TopologyOps.cc:330: failed assertion `numFaultCorners ==
faceSize'
mpirun noticed that job rank 0 with PID 7750 on node kham.gs.umt.edu
exited on signal 6 (Abort trap).
/Users/rbk/pylith/pylith-1.4.2-darwin-powerpc/bin/nemesis: mpirun:
exit 134
/Users/rbk/pylith/pylith-1.4.2-darwin-powerpc/bin/pylith: /Users/rbk/
pylith/pylith-1.4.2-darwin-powerpc/bin/nemesis: exit 1
Thanks in advance,
Becks
---------------------------------------------------------------
Rebecca Bendick
SC 331
Department of Geosciences
University of Montana
Missoula, MT 59812
(406) 243-5774
bendick at mso.umt.edu
More information about the CIG-SHORT
mailing list