[cig-commits] r19817 - short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8

[brad at geodynamics.org]

Author: brad
Date: 2012-03-19 12:52:54 -0700 (Mon, 19 Mar 2012)
New Revision: 19817

Modified:
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/pylithapp.cfg
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step01.cfg
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step02.cfg
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step03.cfg
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step09.cfg
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step10.cfg
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step11.cfg
   short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step18.cfg
Log:
Merge from trunk.

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/pylithapp.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/pylithapp.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/pylithapp.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -39,17 +39,6 @@
 filename = mesh/box_hex8_1000m.exo
 
 # ----------------------------------------------------------------------
-# problem
-# ----------------------------------------------------------------------
-[pylithapp.timedependent.formulation.time_step]
-# Define the total time for the simulation and the default time step size.
-total_time = 0.0*s ; total time of simulation
-# Define an appropriat time step for simulations. Important for
-# nondimensionalization of velocities and slip rates.
-dt = 5.0*year
-
-
-# ----------------------------------------------------------------------
 # materials
 # ----------------------------------------------------------------------
 [pylithapp.timedependent]

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step01.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step01.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step01.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -29,6 +29,13 @@
 # ----------------------------------------------------------------------
 # problem
 # ----------------------------------------------------------------------
+[pylithapp.timedependent.formulation.time_step]
+# Define the total time for the simulation and the default time step size.
+total_time = 0.0*s ; total time of simulation
+# Define an appropriat time step for simulations. Important for
+# nondimensionalization of velocities and slip rates.
+dt = 5.0*year
+
 [pylithapp.timedependent]
 # Set bc to an array of 3 boundary conditions: 'x_pos','x_neg', and 'z_neg'.
 bc = [x_pos,x_neg,z_neg]

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step02.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step02.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step02.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -30,6 +30,13 @@
 # ----------------------------------------------------------------------
 # problem
 # ----------------------------------------------------------------------
+[pylithapp.timedependent.formulation.time_step]
+# Define the total time for the simulation and the default time step size.
+total_time = 0.0*s ; total time of simulation
+# Define an appropriat time step for simulations. Important for
+# nondimensionalization of velocities and slip rates.
+dt = 5.0*year
+
 [pylithapp.timedependent]
 # Set bc to an array of 3 boundary conditions: 'x_pos','x_neg', and 'z_neg'.
 bc = [x_pos,x_neg,z_neg]

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step03.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step03.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step03.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -32,6 +32,13 @@
 # ----------------------------------------------------------------------
 # problem
 # ----------------------------------------------------------------------
+[pylithapp.timedependent.formulation.time_step]
+# Define the total time for the simulation and the default time step size.
+total_time = 0.0*s ; total time of simulation
+# Define an appropriat time step for simulations. Important for
+# nondimensionalization of velocities and slip rates.
+dt = 5.0*year
+
 [pylithapp.timedependent]
 # Set bc to an array of 3 boundary conditions: 'x_pos','x_neg', and 'z_neg'.
 bc = [x_pos,x_neg,z_neg]

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step09.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step09.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step09.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -57,9 +57,9 @@
 # time stepping.
 time_step = pylith.problems.TimeStepAdapt
 
+[pylithapp.timedependent.implicit.time_step]
 # Change the total simulation time to 700 years, and set the maximum time
 # step size to 5 years.
-[pylithapp.timedependent.implicit.time_step]
 total_time = 700.0*year
 max_dt = 5.0*year
 stability_factor = 1.0 ; use time step equal to stable value from materials
@@ -83,13 +83,19 @@
 db_properties.db_A = spatialdata.spatialdb.SimpleDB
 db_properties.db_B = spatialdata.spatialdb.SimpleDB
 
+# Extend yield surface into tensile region (cone becomes line) to
+# allow tensile yielding. In most real applications, gravitational
+# body forces will keep the material in compression so the default
+# value (False) may be used.
+allow_tensile_yield = True
+
 # Provide the values to be obtained from each database and the database
 # name.
 [pylithapp.timedependent.materials.lower_crust.db_properties]
 values_A = [density,vs,vp]   ; Elastic properties.
 db_A.label = Elastic properties
 db_A.iohandler.filename = spatialdb/mat_elastic.spatialdb
-values_B = [friction-angle,cohesion,dilatation-angle]   ; Drucker-Prager properties.
+values_B = [friction-angle,cohesion,dilatation-angle]
 db_B.label = Drucker-Prager properties
 db_B.iohandler.filename = spatialdb/mat_druckerprager.spatialdb
 

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step10.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step10.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step10.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -28,6 +28,13 @@
 # ----------------------------------------------------------------------
 # problem
 # ----------------------------------------------------------------------
+[pylithapp.timedependent.formulation.time_step]
+# Define the total time for the simulation and the default time step size.
+total_time = 0.0*s ; total time of simulation
+# Define an appropriat time step for simulations. Important for
+# nondimensionalization of velocities and slip rates.
+dt = 5.0*year
+
 [pylithapp.timedependent]
 # Set bc to an array of 3 boundary conditions: 'x_pos','x_neg', and 'z_neg'.
 bc = [x_pos,x_neg,z_neg]

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step11.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step11.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step11.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -26,6 +26,13 @@
 # ----------------------------------------------------------------------
 # problem
 # ----------------------------------------------------------------------
+[pylithapp.timedependent.formulation.time_step]
+# Define the total time for the simulation and the default time step size.
+total_time = 0.0*s ; total time of simulation
+# Define an appropriat time step for simulations. Important for
+# nondimensionalization of velocities and slip rates.
+dt = 5.0*year
+
 [pylithapp.timedependent]
 # Set bc to an array of 3 boundary conditions: 'x_pos','x_neg', and 'z_neg'.
 bc = [x_pos,x_neg,z_neg]

Modified: short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step18.cfg
===================================================================
--- short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step18.cfg	2012-03-19 19:46:24 UTC (rev 19816)
+++ short/3D/PyLith/branches/pylith-scecdynrup/examples/3d/hex8/step18.cfg	2012-03-19 19:52:54 UTC (rev 19817)
@@ -27,6 +27,13 @@
 # ----------------------------------------------------------------------
 # problem
 # ----------------------------------------------------------------------
+[pylithapp.timedependent.formulation.time_step]
+# Define the total time for the simulation and the default time step size.
+total_time = 0.0*s ; total time of simulation
+# Define an appropriat time step for simulations. Important for
+# nondimensionalization of velocities and slip rates.
+dt = 5.0*year
+
 [pylithapp.timedependent]
 # Set bc to an array of 6 boundary conditions (one for each side of the domain).
 bc = [x_pos,x_neg,y_pos,y_neg,z_neg,z_pos]