[CIG-SHORT] PyLith version 2.2.0 installation from source

[Brad Aagaard]

Josimar,

The error you are getting seems to suggest that the compiler does not 
recognize the -fp-model strict command line argument. This could be the 
case if a different compiler is being used than the one it thinks it 
should be using.

Check to make sure the gcc and MPI in your path are consistent. Usually 
"mpicc -show" will show you which compiler is being used. Also make sure 
the shell environment when you build matches the one used during the 
configure (and loads the setup.sh generated in the configure process).

If you still get stuck, send the config.log for the top-level installer 
configure, and the config.log and make.log (capture all of the make 
output) for the package that fails to build.

Regards,
Brad





On 06/07/2017 01:39 PM, Josimar Alves da Silva wrote:
> Dear Brad,
> 
> I am building PyLith version 2.2.0 from source on a linux machine. I am 
> getting the error below.
> 
> See computer information below along with the error message at the end 
> of the e-mail. The config.log file is also attached.
> 
> Please let me know if you have seen this error before and how to correct it.
> 
> thank you in advance,
> Josimar
> 
> 
> 
> ############# BASIC COMPUTER INFORMATION HERE
> 
> Linux eofe4 2.6.32-504.30.3.el6.x86_64 #1 SMP Wed Jul 15 10:13:09 UTC 
> 2015 x86_64 x86_64 x86_64 GNU/Linux
> 
> 
> ########################
> 
> Architecture:          x86_64
> 
> CPU op-mode(s):        32-bit, 64-bit
> 
> Byte Order:            Little Endian
> 
> CPU(s):                16
> 
> On-line CPU(s) list:   0-15
> 
> Thread(s) per core:    1
> 
> Core(s) per socket:    8
> 
> Socket(s):             2
> 
> NUMA node(s):          2
> 
> Vendor ID:             GenuineIntel
> 
> CPU family:            6
> 
> Model:                 45
> 
> Model name:            Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz
> 
> Stepping:              7
> 
> CPU MHz:               1999.998
> 
> BogoMIPS:              3999.47
> 
> Virtualization:        VT-x
> 
> L1d cache:             32K
> 
> L1i cache:             32K
> 
> L2 cache:              256K
> 
> L3 cache:              20480K
> 
> NUMA node0 CPU(s):     0,2,4,6,8,10,12,14
> 
> NUMA node1 CPU(s):     1,3,5,7,9,11,13,15
> 
> 
> 
> 
> 
> ############# ERRO MESSAGE FROM PYLITH INSTALLATION HERE #############
> 
> make[4]: Entering directory `/home/josimar/build/pylith/python-build'
> 
> mpicc -c -fno-strict-aliasing -fp-model strict -g -O2 -DNDEBUG -g 
> -fwrapv -O3 -Wall -Wstrict-prototypes  -I. -IInclude 
> -I../Python-2.7.13/Include -I/home/josimar/pylith/include  -fPIC 
> -DPy_BUILD_CORE -o Modules/python.o ../Python-2.7.13/Modules/python.c
> 
> mpicc -c -fno-strict-aliasing -fp-model strict -g -O2 -DNDEBUG -g 
> -fwrapv -O3 -Wall -Wstrict-prototypes  -I. -IInclude 
> -I../Python-2.7.13/Include -I/home/josimar/pylith/include  -fPIC 
> -DPy_BUILD_CORE -o Parser/acceler.o ../Python-2.7.13/Parser/acceler.c
> 
> gcc: error: strict: No such file or directory
> 
> gcc: error: unrecognized command line option ‘-fp-model’
> 
> make[4]: *** [Modules/python.o] Error 1
> 
> make[4]: *** Waiting for unfinished jobs....
> 
> gcc: error: strict: No such file or directory
> 
> gcc: error: unrecognized command line option ‘-fp-model’
> 
> make[4]: *** [Parser/acceler.o] Error 1
> 
> make[4]: Leaving directory `/home/josimar/build/pylith/python-build'
> 
> make[3]: *** [python] Error 2
> 
> make[3]: Leaving directory `/home/josimar/build/pylith'
> 
> make[2]: *** [installed_python] Error 2
> 
> make[2]: Leaving directory `/home/josimar/build/pylith'
> 
> make[1]: *** [installed_swig] Error 2
> 
> make[1]: Leaving directory `/home/josimar/build/pylith'
> 
> make: *** [installed_pylith] Error 2
> 
> 
> 
> _______________________________________________
> CIG-SHORT mailing list
> CIG-SHORT at geodynamics.org
> http://lists.geodynamics.org/cgi-bin/mailman/listinfo/cig-short
>