[CIG-SHORT] output.vtk

[surendra at caltech.edu]

On Aug 30, 2012, at 4:12 PM, Birendra jha wrote:

> Dear developers,
> 
> How can I suppress output_t***.vtk, output_info.vtk files? I did not request them but they are still created at every timestep. They contain stress and total_strain fields over whole 3D grid and are huge.
> 

You can use the following settings for bulk.  Similar settings exist for fault.
cell_info_fields = []
cell_data_fields = []
--Surendra

> My test.cfg file:
> 
> [pylithapp]
> 
> [pylithapp.timedependent]
> 
> # We want an implicit formulation.
> formulation = pylith.problems.Implicit
> 
> bc = [East,West,North,South,z_neg]
> 
> # Set gravity field (default is None)
> #gravity_field = spatialdata.spatialdb.GravityField
> 
> [pylithapp.timedependent.implicit]
> # Set the output to an array of 2 output managers.
> # We will output the solution over the domain and the ground surface.
> output = [domain,subdomain]
> #output = [domain]
> 
> # Set subdomain component to OutputSolnSubset (subset of domain).
> output.subdomain = pylith.meshio.OutputSolnSubset
> 
> # ----------------------------------------------------------------------
> # boundary conditions
> # ----------------------------------------------------------------------
> # -x face
> [pylithapp.timedependent.bc.West]
> bc_dof = [0,1]
> label = West
> db_initial.label = Dirichlet BC on West
> 
> # -y face
> [pylithapp.timedependent.bc.South]
> bc_dof = [0,1]
> label = South
> db_initial.label = Dirichlet BC on South
> 
> # +x face
> [pylithapp.timedependent.bc.East]
> bc_dof = [0,1]
> label = East
> db_initial.label = Dirichlet BC on East
> 
> # +y face
> [pylithapp.timedependent.bc.North]
> bc_dof = [0,1]
> label = North
> db_initial.label = Dirichlet BC on North
> 
> # -z face
> [pylithapp.timedependent.bc.z_neg]
> bc_dof = [0,1,2]
> label = z_neg
> db_initial.label = Dirichlet BC on -z
> 
> # ----------------------------------------------------------------------
> # output
> # ----------------------------------------------------------------------
> # Give basename for VTK output of solution over domain.
> [pylithapp.problem.formulation.output.domain]
> # We specify that output occurs in terms of a given time frequency, and
> # ask for output every 50 years.
> output_freq = time_step
> time_step = 10*day
> 
> [pylithapp.problem.formulation.output.domain.writer]
> filename = ../../../data/bjha/Lombardia.vtk
> time_format = %04.1f ; Time stamp will be xxx.x with the "." removed.
> time_constant = 10*day ; Normalize time stamp by years
> 
> # Give basename for VTK domain output of solution over ground surface.
> [pylithapp.problem.formulation.output.subdomain]
> label = z_pos ; Name of nodeset for subdomain
> output_freq = time_step
> time_step = 10*day
> writer.filename = ../../../data/bjha/Lombardia-groundsurf.vtk
> writer.time_format = %04.1f
> writer.time_constant = 10*day
> 
> Thanks and best regards
> Birendra
> _______________________________________________
> CIG-SHORT mailing list
> CIG-SHORT at geodynamics.org
> http://geodynamics.org/cgi-bin/mailman/listinfo/cig-short