You are here: Home / Resources / All
98.84.18.52

Resources: All

Find a resource
  1. 2015 x
  2. 2012workshoponcrustaldeformationmodeling x
  3. webinar x
  1. Fault strength evolution during the seismic cycle: Insights from the laboratory

    10 Mar 2023 | Contributor(s): John Bedford

    Geophysical evidence suggests that some faults are frictionally strong, in agreement with laboratory measurements of quasi-static frictional strength (μ ≈ 0.6-0.8) for many crustal materials; whereas others studies have found that some faults are weak when compared to laboratory friction...

  2. 2022 Mainshock and aftershock sequence simulations in a nonplanar fault network

    19 May 2022 | Webinars | Contributor(s): So Ozawa, Ryosuke Ando

    Aftershocks seem to be located along the trace of the mainshock fault; however, due to the location error, we do not know their exact location relative to the mainshock fault. Here, we hypothesize that most aftershocks occur on small subsidiary faults instead of the mainshock fault, and they...

  3. 2022 Poroelastic Implementation in PyLith: Gateway to Multiphysics

    13 May 2022 | Webinars | Contributor(s): Robert L Walker

    Thursday May 12, 2022 @ 2P PDT Poroelastic Implementation in PyLith: Gateway to Multiphysics Robert Walker, SUNY Buffalo PyLith, a community, open-source code (https://geodynamics.org/resources/pylith) for modeling quasi-static and dynamic crustal deformation with an emphasis on earthquake...

  4. 2022 Energy transfer among flow and magnetic fields with different equatorial symmetry during the dipole reversal in a geodynamo simulation

    17 Feb 2022 | Webinars | Contributor(s): Takumi Kera, Hiroaki Matsui, Masaki Matsushima, Yuto Katoh

    The geomagnetic field has reversed its polarity, and some numerical dynamos have suggested that anti-symmetric flow with respect to the equator plays a role in reversals. Olson et al., (2004) suggested that the equatorial antisymmetric flow is temporarily strengthened, and transports a locally...

  5. 2021 SMOREs Introduction

    02 Nov 2021 | Webinars | Contributor(s): John Naliboff

    2021 SMOREs ShowcaseJohn Naliboff, New Mexico Tech

  6. 2021 Interactions between Lithospheric Instabilities and Formation of Mantle Plumes in Venus

    02 Nov 2021 | Webinars | Contributor(s): Hiva Mohammadzadeh

    2021 SMOREs ShowcaseHiva Mohammadzadeh, Los Angeles Pierce College

  7. 2021 Early Earth Influence of Radiogenic Heating on Mid-Ocean Ridge Depths and Seafloor Subsidence

    02 Nov 2021 | Webinars | Contributor(s): Keneni Godana

    2021 SMOREs ShowcaseKeneni Godana, University of Illinois at Chicago

  8. 2021 Bayesian Uncertainty Quantification of Subduction Zone Rheology from the Geoid

    02 Nov 2021 | Webinars | Contributor(s): Elena Ehrlich

    2021 SMOREs ShowcaseElena Ehrlich, North Carolina State University

  9. 2021 As Above So Below: A Simulation of the Continental Lithosphere and LLSVPs as Thermal Insulators Using ASPECT

    02 Nov 2021 | Webinars | Contributor(s): Dante Hickey

    2021 SMOREs ShowcaseDante Hickey, Reed College

  10. 2020 Numerical models of lower crustal flow explain Yellowstone's "tectonic parabola"

    07 Oct 2021 | Webinars | Contributor(s): Jonathan Perry-Houts

    Several hypotheses exist for the origin of the seismically active region of high topography surrounding the Yellowstone hotspot track. Among these is the idea that a dense mid-crustal sill has driven viscous lower crust away from the hotspot track, producing crustal thinning/subsidence in the...

  11. Megathrust friction in the 2010 Maule earthquake area in relation to forearc morphology and mechanical stability, and to earthquake rupture dynamics

    02 Apr 2021 | Workshops | Contributor(s): Nadaya Cubas, J.P. Avouac, N. Lapusta, Y. Leroy, P. Souloumiac

    Megathrust friction in the 2010 Maule earthquake area in relation to forearc morphology and mechanical stability, and to earthquake rupture dynamics. June 18-22, 2012. Nadaya Cubas, J.P. Avouac, N. Lapusta. 

  12. The nucleation of a laboratory earthquake: Implications for foreshocks and minimum earthquake size

    02 Apr 2021 | Workshops | Contributor(s): Greg McLaskey, Brian Kilgore, Nick Beeler, Dave Lockner

    The nucleation of a laboratory earthquake: Implications for foreshocks and minimum earthquake size. June 18-22, 2012. Greg McLaskey, Brian Kilgore, Nick Beeler, Dave Lockner. 

  13. Slow slip events simulated using a friction law with a velocity-weakening to -strengthening transition

    02 Apr 2021 | Workshops | Contributor(s): Jessica Hawthorne, Allan Rubin

    Slow slip events simulated using a friction law with a velocity-weakening to -strengthening transition. June 18-22, 2012. Jessica Hawthorne, Allan Rubin. 

  14. Crust‐mantle interactions of the Escalante anomaly, Colorado Plateau

    02 Apr 2021 | Workshops | Contributor(s): Jolante van Wijk

    Crust‐mantle interactions of the Escalante anomaly, Colorado Plateau. June 18-22, 2012. Jolante van Wijk. 

  15. Geodetic Source Inversion Validation

    02 Apr 2021 | Workshops | Contributor(s): Rowena Lohman

    Geodetic Source Inversion Validation. June 18-22, 2012. Rowena Lohman. 

  16. Understanding slip on oceanic transform faults through observations from the lab to the fault scale

    02 Apr 2021 | Workshops | Contributor(s): Margaret Boettcher

    Understanding slip on oceanic transform faults through observations from the lab to the fault scale. June 18-22, 2012. Margaret Boettcher. 

  17. Constraints on slow slip events from geodetic observations

    02 Apr 2021 | Workshops | Contributor(s): David Schmidt, Haiying Gao

    Constraints on slow slip events from geodetic observations. June 18-22, 2012. David Schmidt, Haiying Gao. 

  18. Bayesian Earthquake Modeling

    02 Apr 2021 | Workshops | Contributor(s): Sarah Minson, Mark Simons, James L. Beck, Junle Jiang, Fransisco H. Ortega, Asaf Inbal, Susan E. Owen, Anthony Sladen

    Bayesian Earthquake Modeling. June 18-22, 2012. Sarah Minson. 

  19. Interpreting interseismic observations with elastic block models

    02 Apr 2021 | Workshops | Contributor(s): Jack Loveless, Brendan Meade

    Interpreting interseismic observations with elastic block models. June 18-22, 2012. Jack Loveless, Brendan Meade. 

  20. Scientific issues raised by using GPS data to estimate fault slip rates

    02 Apr 2021 | Workshops | Contributor(s): Kaj Johnson, Bob Simpson, Jim Savage, Wayne Thatcher

    Scientific issues raised by using GPS data to estimate fault slip rates. June 18-22, 2012. Kaj Johnson & UCERF3/GPS Group, Bob Simpson, Jim Savage, Wayne Thatcher. 

  21. Fault slip rates, distributed deformation rates, and long-term seismicity estimated with kinematic F-E program NeoKinema

    02 Apr 2021 | Workshops | Contributor(s): Peter Bird

    Fault slip rates, distributed deformation rates, and long-term seismicity estimated with kinematic F-E program NeoKinema. June 18-22, 2012. Peter Bird. 

  22. CUBIT: Examples of 3-D meshing

    02 Apr 2021 | Workshops | Contributor(s): Brad Aagaard

    CUBIT: Examples of 3-D meshing. June 18-22, 2012. Brad Aagaard. 

  23. Green's Functions: Inverting Geodetic Data for Fault Slip with 2-D Earth Structure

    02 Apr 2021 | Workshops | Contributor(s): Charles Williams, Brad Aagaard, Matt Knepley

    Green's Functions: Inverting Geodetic Data for Fault Slip with 2-D Earth Structure. June 18-22, 2012. Charles Williams, Brad Aagaard, Matt Knepley. 

  24. Crustal Deformation Modeling Tutorial: PyLith: Introduction to Dynamic Spontaneous Rupture

    02 Apr 2021 | Workshops | Contributor(s): Brad Aagaard, Matthew Knepley, Charles Williams

    Crustal Deformation Modeling Tutorial: PyLith: Introduction to Dynamic Spontaneous Rupture. June 18-22, 2012. Brad Aagaard, Matthew Knepley, Charles Williams. 

  25. Crustal Deformation Modeling Tutorial: PyLith: Modeling Afterslip with Friction

    02 Apr 2021 | Workshops | Contributor(s): Brad Aagaard, Matthew Knepley, Charles Williams

    Crustal Deformation Modeling Tutorial: PyLith: Modeling Afterslip with Friction. June 18-22, 2012. Brad Aagaard, Matthew Knepley, Charles Williams. 

  26. Using PETSc Solvers in PyLith

    02 Apr 2021 | Workshops | Contributor(s): Matthew Knepley, Brad Aagaard, Charles Williams

    Using PETSc Solvers in PyLith. June 18-22, 2012. Matthew Knepley, Brad Aagaard, Charles Williams. 

  27. CUBIT: 3-D Meshing with Nonplanar Surfaces

    02 Apr 2021 | Workshops | Contributor(s): Charles Williams, Brad Aagaard, Matt Knepley

    CUBIT: 3-D Meshing with Nonplanar Surfaces. June 18-22, 2012. Charles Williams, Brad Aagaard, Matt Knepley. 

  28. Crustal Deformation Modeling Tutorial: PyLith: Introduction to Fault Friction

    02 Apr 2021 | Workshops | Contributor(s): Brad Aagaard, Matthew Knepley, Charles Williams

    Crustal Deformation Modeling Tutorial: PyLith: Introduction to Fault Friction. June 18-22, 2012. Brad Aagaard, Matthew Knepley, Charles Williams.

  29. Crustal Deformation Modeling Tutorial: PyLith/CUBIT: 2-D subduction zone with coseismic and interseismic deformation

    02 Apr 2021 | Workshops | Contributor(s): Brad Aagaard, Charles Williams, Matthew Knepley

    Crustal Deformation Modeling Tutorial: PyLith/CUBIT: 2-D subduction zone with coseismic and interseismic deformation. June 18-22, 2012. Brad Aagaard, Charles Williams, Matthew Knepley. 

  30. Crustal Deformation Modeling Tutorial: Overview of CUBIT

    02 Apr 2021 | Workshops | Contributor(s): Brad Aagaard, Rowena Lohman, Charles Williams, Matthew Knepley

    Crustal Deformation Modeling Tutorial: Overview of CUBIT. June 18-22, 2012. Brad Aagaard, Rowena Lohman, Charles Williams, Matthew Knepley. 

  31. Overview of PyLith

    02 Apr 2021 | Workshops | Contributor(s): Charles Williams, Brad Aagaard, Matthew Knepley

    Overview of PyLith. June 18-22, 2012. Charles Williams, Brad Aagaard, Matthew Knepley. 

  32. Relax: Semi-analytic Fourier-domain solver and equivalent body forces for quasi-static relaxation of stress perturbation

    02 Apr 2021 | Workshops | Contributor(s): Sylvain Barbot

    Relax: Semi-analytic Fourier-domain solver and equivalent body forces for quasi-static relaxation of stress perturbation. June 18-22, 2012. Sylvain Barbot. 

  33. 2019 The Release of the GEM Global Active Faults Database and Global Seismic Hazard Map

    04 Feb 2021 | Webinars | Contributor(s): Richard Styron

    In late 2018, the Global Earthquake Model Foundation (GEM) released the initial version of several major products relating to seismic hazard and risk, including the Global Seismic Hazard Map, the Global Seismic Risk Map, and the Global Active Faults Database. Though these are intended primarily...

  34. 2019 HeFESTO: A tool for exploring Earth's physical properties and their effects on mantle dynamics

    04 Feb 2021 | Webinars | Contributor(s): Carolina Lithgow-Bertelloni, Lars Stixrude

    The minerals that exist at the extreme pressure and temperature conditions of the mantle and their physical properties determine the dynamics of the mantle. Both are also critical for comparison with seismic observations that put constraints on our knowledge of mantle structure and...

  35. 2019 Introduction to Quagmire

    04 Feb 2021 | Webinars | Contributor(s): Louis Moresi, Ben Mather, Romain Beucher

    Quagmire is an open source, parallel python module for modelling surface processes and landscape evolution. It comes from the Underworld geodynamics group and has many common design patterns to Underworld. For starters, this is not an out-of-the-box landscape evolution code — it is instead...

  36. 2018 Introduction to thermal-mechanical lithosphere models with surface processes

    04 Feb 2021 | Webinars | Contributor(s): Louis Moresi, Romain Beucher

    Surface processes including erosion, transport and sedimentation have the potential to strongly influence crustal and lithospheric deformation whether passively, through isostatic response, or more actively by affecting the thermal structure, the potential energy field, and / or the local stress...

  37. 2018 Pythonic Geodynamics

    04 Feb 2021 | Webinars | Contributor(s): Gabriele Morra, David A. Yuen, Sang-Mook Lee

    Students and young researchers who want to learn to use computational tools for geodynamic modeling have the option to choose among a wide range of numerical tools. I will show how Python and its libraries represent an easy-to-use platform for self-learning, with performance close to compiled...

  38. 2017 Geodynamic modeling with staggered finite differences and marker in cell: theory, teaching and examples

    04 Feb 2021 | Webinars | Contributor(s): Taras Gerya

    Numerical modeling of geodynamic processes is an essential approach in both science and industry with ever- growing demand and high efficiency/cost ratio. Current trend in geodynamic modeling is to develop universal approaches with potentially unlimited number of applications. One simple...

  39. 2017 Introduction to the spectral-infinite-element method

    04 Feb 2021 | Webinars | Contributor(s): Hom Nath Gharti, Jeroen Tromp

    The governing equations for the elastic-gravitational deformation of an Earth model involve a perturbed gravitational potential. The gravitational potential is governed by Poisson’s equation inside the Earth and by Laplace’s equation in the rest of space. The infinite domain...

  40. 2016 Software Practices in Computational Science Communities – an Overview

    04 Feb 2021 | Webinars | Contributor(s): Anshu Dubey

    Scientific code developers typically adopt software processes derived from the mainstream (non-scientific) community when continuing without them becomes impractical. However, many software best practices need modification and/or customization, partly because the codes are used for...

  41. 2016 Resolution analysis by random probing

    04 Feb 2021 | Webinars | Contributor(s): Andreas Fichtner, Tristan van Leeuwen

    We present a new method for resolution analysis in tomography, based on stochastic probing of the Hessian or resolution operators. Key properties of the method are (i) low algorithmic complexity and easy implementation, (ii) applicability to any tomographic technique, including full-waveform...

  42. 2016 Statistical and computational challenges of constraining greenhouse gas budgets

    04 Feb 2021 | Webinars | Contributor(s): Anna M. Michalak

    Predicting future changes to the global carbon cycle (and therefore climate) and quantifying anthropogenic emissions of greenhouse gases (GHGs) both require an understanding of net GHGs emissions and uptake across a variety of spatial and temporal scales.  This talk will explore some of the...

  43. 2016 Uncertainty Quantification in Computational Models of Physical Systems

    04 Feb 2021 | Webinars | Contributor(s): Habib Najm

    Models of physical systems typically involve inputs/parameters that are determined from empirical measurements, and therefore exhibit a certain degree of uncertainty. Estimating the propagation of this uncertainty into computational model output predictions is crucial for purposes...

  44. 2016 Verification, Validation, and Predictive Capability: What's What?

    04 Feb 2021 | Webinars | Contributor(s): William Oberkampf

    Engineering and geosciences organizations must increasingly rely on computational simulation for the design, predicted response, and performance of manmade and natural systems. Computational analysts,  decision makers, and regulatory authorities who rely on simulation should have practical...

  45. 2015 ASPECT: From Benchmarking to 3D Subduction Applications

    04 Feb 2021 | Webinars | Contributor(s): Cedric Thieulot, Anne Glerum, Menno Fraters, Wim Spakman

    ASPECT, the Advanced Solver for Problems in Earth's Convection, is an extensible open source, community supported code.  The code is being applied to a broad range of problems in geodynamics.  This talk will explore the community's efforts in benchmarking, implementation of...

  46. 2015 ASPECT: From Benchmarking to 3D Subduction Applications

    04 Feb 2021 | Webinars | Contributor(s): Cedric Thieulot, Anne Glerum, Menno Fraters, Wim Spakman

    ASPECT, the Advanced Solver for Problems in Earth's Convection, is an extensible open source, community supported code.  The code is being applied to a broad range of problems in geodynamics.  This talk will explore the community's efforts in benchmarking, implementation of...

  47. 2015 An introduction to Virtual Quake

    04 Feb 2021 | Webinars | Contributor(s): Kasey Schultz, John Wilson

    This webinar will introduce Virtual Quake, a boundary element code that performs simulations of fault systems based on stress interactions between fault elements to understand long term statistical behavior. The webinar will cover:Downloading, installing and running Virtual...

  48. 2015 An introduction to Virtual Quake

    04 Feb 2021 | Webinars | Contributor(s): Kasey Schultz, John Wilson

    This webinar will introduce Virtual Quake, a boundary element code that performs simulations of fault systems based on stress interactions between fault elements to understand long term statistical behavior. The webinar will cover:Downloading, installing and running Virtual...

  49. 2015 Simulating seismic wave propagation with SW4

    04 Feb 2021 | Webinars | Contributor(s): Anders Petersson

    This webinar describes how to use the SW4 code to simulate ground motion due to earthquakes. After a brief overview of the numerical method, we describe how to set up a simulation in terms of seismic sources, the material model, visco-elastic attenuation, and topography. We also present some of...

  50. 2015 Simulating seismic wave propagation with SW4

    04 Feb 2021 | Webinars | Contributor(s): Anders Petersson

    This webinar describes how to use the SW4 code to simulate ground motion due to earthquakes. After a brief overview of the numerical method, we describe how to set up a simulation in terms of seismic sources, the material model, visco-elastic attenuation, and topography. We also present some of...